fluid power Accessories Quality Products for Mechanical & Fluid Power

CONTENTS quality products for mechanical & fluid power E & OE Whilst all reasonable care is taken in compiling the information contained in this publication, no responsibility is accepted for printing errors. All information contained in this brochure is subject to change after the date of publication.

Fluid Power Accessories A comprehensive range of accessories for use within many areas of industry. Visual level gauges up to 2 metres in length with/without electrical contacts, bulls eye level gauges and viewing windows offer a versatile solution to monitoring fluid quality and volume within a reservoir. Filler/breather assemblies for top or side entry, magnetic core and drain plugs and fixed thermostats for high temperature sensing complete the range. These products are manufactured using the most suitable and high quality materials, undergoing stringent inspection before delivery. Characteristics...

TCF/Filling Plug with Breather

TCF/F/Filling plug with breather and milled head TCF/F & TCFS Filling Plugs Hole for venting internal pressure. The milled head produces a crown with greater contact area to the crankcase. For application only on upper part of the crankcase away from moving parts. For applications requiring extra-tight sealing, type TSFT/N (page8) is recommended. TCFS/Filling plug with breather Threaded plug with hexagonal head, vent hole and a 40 microns bronze filter for increased contaminant protection to extend oil life. The TCFS is especially suitable in dusty

TCSF/Z & TMV Filling Plugs TCSF/Z/Filling plug with breather Threaded plug with knurled round head for hand-tightening. The vent hole and a 40 micron (200 micron on sizes 1¼’’ to 2’’ incl.) bronze filter give increased contamination protection to extend oil life. The TCSF/Z is therefore especially suitable in dusty environments and is recommended for applications on hydraulic units. TMV/Breather plug Breather plug with O-ring and relief valve with spring set to open in the range 0.10 to 0.15 bar to vent internal pressure. The valve has a dual function of keeping out contamination and retaining...

TSVV & TSFO/R Breather Plugs TSVV/Breather plug with double valve The standard setting is 0.10 bar which may be adjusted if necessary. The double valve allows venting of internal pressure andinlet of external air. Particularly suitable for tanks, oil-hydraulic circuits and hydraulically operated lifting machines. TSFO/R/Breather plug Oil filling and breather plug with galvanised steel cover. Large internal chamber with O-ring especially designed for mobile machines that have a large degree of movement.

TSF/Oil Filling Plug with Breather

TSFT/N & TSS Oil Filling with Breather Plugs TSFT/N/Oil filling plug with breather Large chamber with labyrinth and slot at right angles to the axis protected by a galvanised steel cover to prevent introduction of contaminents. Particularly suitable for use on reduction gears, geared motors, speed variators and gearboxes. TSS/Breather plug with valve Breather plug with galvanised steel cover and specially designed internal valve calibrated from 0.05 to 0.10 bar, which opens at intervals to vent internal pressure created by fluid turbulence. Besides keeping out foreign bodies, it allows overturning...

FLGV Inclined Flange for Side Applications FLGV/Inclined flange for side applications Made of aluminium, supplied complete with fixing screws and gasket. For mounting different styles of breather filling and level Suitable for mounting to maximum wall thickness of 6 mm. Available as an option with pre-filter basket as shown below. To order specify FLGV + filter.

PRS/F/ Extension for Oil with Breather

TSCM/ Magnetic Drain Plug

Head of hardened, tempered light alloy. Permanent magnetic sections of special alloy with wide-radius action. Non-magnetic coating is smooth for easier, better cleaning. Recommended for grinding machines, hydraulic units and large tanks. Different lengths supplied on request. FMC/LS/Magnetic filter with dipstick and breather Magnetic dipstick built into breather plug. Galvanized-steel cover vents internal pressure and keeps out foreign bodies during the intake stroke. The magnetic dipstick is composed of permanent magnetic sections in special alloy with wide-radius action. The non-magnetic coating...

TC/Z/Filling Plug

Tight-sealing, maximum resistance to twisting and overheating. TC/Filling Plug

OBLÒ Inspection porthole or liquid level Ø 100 Made of aluminium light alloy with tempered glass; supplied complete with sealing washers, M6 screws and O-ring. The recommended diameter of the hole in the tank is 100 mm. The thickness of the reservoir must not be less than 5 mm. OBLÒ Inspection porthole or liquid level Ø 148 Made of aluminium light alloy with tempered glass; supplied complete with sealing washers, M6 screws and O-ring. The recommended diameter of the hole in the tank is Ø149 mm . The thickness of the reservoir must not be less than 5 mm.

Transparent inspection window unaffected by high or low temperatures. Avoid contact with alcohol and solvents. O-ring for press fit assembly. TLP/Visual level Transparent glass that does not alter at high or low temperatures. It is particularly suitable for seeing the fluid from the side, as well as the circulation of fluid from the top. Avoid contact with alcohol and solvents. Supplied with back nut for non-threaded holes on request. IFC/Dome - shaped level gauge

Standard polyamide transparent inspection window unaffected by high or low temperatures. Avoid contact with alcohol and solvents. Special version: with Pyrex glass for high temperatures. By request: with back nut for unthreaded hole. TLA/Visual level indicator

This unit was designed to satisfy both technical and economical requirements, because it can be applied with a single hole obtaining three services: oil filling, vapour venting, level indication. Avoid contact with alcohol and solvents GTSF/Level indicator unit with breather plug