F15 Ferra Series Hydraulic Pumps quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk

DESCRIPTION, FEATURES AND BENEFITS Concentric F series gear pumps have an outstanding history in mobile off-highway applications. The F15 is the latest addition. Taking the best design components from the F20/F30 series and adding new technology, Concentric has created a product of very high efficiency, yet retains the robust nature of the traditional cast iron bodied gear pump. The gear and shaft are one piece construction for drive and driven gear providing superior resistance to fatigue and allowing the use of large diameter journals for higher load-bearing capacity. Made of high strength...

* Lower speeds are permissable when operating below rated pressure. Rated speed of double pump is governed by pump with lower speed rating. If deliveries of both pumps are combined, rated pressure is governed by pump with lower pressure rating. Efficiency Depending on displacement, speed and pressure, volumetric efficiency is 81-98% and overall efficiency is 71-92% with SAE 10W oil at 49°C (120°F). Inlet conditions Pressure on the inlet should not exceed 1 bar (15 psi). Under continuous operation, inlet vacuum should not exceed 0.17 bar (5" Hg). Operating temperatures Under continuous operation,...

F15 .7 FRONT / SIDE VIEW F15 REAR / ISO VIEW All dimensions shown are for single shaft seal version and "for reference only". Consult factory for your specific configuration.

ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right.

FRONT / SIDE VIEW F15 SECTION REAR VIEW W900 SECTION ISO VIEW All dimensions shown are for reference only. Consult fac tory for your specific configuration.

Model Code for F1509 Ferra Series Tandem Pumps 3 (Mount Type) Order Code S W Description Single Shaft Seal Wet Mount (Double Shaft Seal) 4 (Front Cover) Order Code 1 2 8 Mount Front Cover Front Sectio Inlet Displacements Front Section Outlet Rear Section Inlet Displacements Rear Section Outlet Drive Shaft Shaft Seal Design Designation Rotation Description F15 / W900 Ferra Series Tandem Pump Ferra Series 2 (Series) Order Code F1509 Special Seals ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special...

FRONT / SIDE VIEW REAR / ISO VIEW F1515 All dimensions shown are for reference only. Consult factory for your specific configuration.

Model Code for F1515 Ferra Series Tandem Pumps 3 (Mount Type) Order Code S W Description Single Shaft Seal Wet Mount (Double Shaft Seal) 4 (Front Cover) Order Code 1 2 8 Mount Front Cover Front Section Inlet Displacements Front Section Outlet Rear Section Inlet Displacements Rear Section Outlet Drive Shaft Shaft Seal Design Designation Rotation Description F15 / F15 Ferra Series Tandem Pump Ferra Series 2 (Series) Order Code F1515 Special Seals ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special...

FRONT / SIDE VIEW REAR / ISO VIEW All dimensions shown are for reference only. Consult factory for your specific configuration.

ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right.

MOUNTING FLANGES .47 [11.94] R. 4 PLACES Consult factory for availability. .438 [11.13] Dia. thru 2 places as shown Seal drain hole Consult factory for availability. Seal drain hole .65 Mounting Flange Thickness [16.56] Consult factory for availability.

DRIVE SHAFTS SAE “B” STRAIGHT KEY Shaft No. 1: For F15, F1509 & F1515 Pumps SAE “B” INVOLUTE SPLINE Shaft No. 12: For F15, F1509 & F1515 Pumps Flat Root - Side Fit No. of Teeth - 13 Diametral Pitch - 16/32 Pressure Angle - 30° SAE “B-B” INVOLUTE SPLINE Shaft No. 99: For F15, F1509, F1515 & F151515 Pumps 451.9 Nm (4000 in. lb.) torsional capacity.* Flat Root - Side Fit No. of Teeth - 15 Diametral Pitch - 16/32 Pressure Angle - 30° * Applies to coaxial applications only. Consult representative if application requires greater capacity or has side loads. For shaft options not shown, contact factory...

Technical Performance Data F15 Pumps 100%

COnCEHTRIC PUMPS & MOTORS GC Series Pumps Displacements Heavy Duty 1.06 to 11.65 cc GC Series High/Low Pumps High Pressure Displacements 1.06 to 4.22 cc Low Pressure Displacements 4.22 to 12.71 cc Maximum Pressure 276 bar Maximum Speed 4,000 rpm F12 & F15 Ferra Series Pumps F12 Displacements 16 - 41 cc F15 Displacements 19 to 50 cc Maximum Pressure 276 bar Maximum Speed 3,600 rpm F20/F30 Pumps & F20-LS/F30-LS Load Sense Ferra Series Pumps Displacements 23 to 161 cc Maximum Pressure 276 bar Maximum Speed 3,600 rpm D Series Pumps Displacements 03.80 to 22.85 cc D Series High/Low Pumps High Pressure...

COnCEOTRIC POWER PACKS PUMP/MOTORS (DC/AC) DC Voltage Range 12 to 72VDC AC Horsepower Range 0.367749 to 2.2065 kW Pump Displacements 0.65 to 28 cc HE "BOX" POWER PACKS Voltage Range 12 to 24 VDC Pump Displacements 0.80 to 6.36 cc Maximum Pressure 230 bar Maximum Pressure HB800 POWER PACKS Voltage Range 12 to 24 VDC Pump Displacements 0.60 to 1.5 cc Reservoirs 0.5 to 3.8 litres plastic Maximum Pressure 180 bar HE-Q (QUIET) POWER PACKS Voltage Range 24 VDC WQ300 Pump Displacements 1.2 to 5.7 cc Noise 42dB(A) HE1000 SERIES POWER PACKS Voltage Range 12 to 24 VDC Pump Displacements 0.24 to 2 cc Maximum...

quality products for mechanical & fluid power jbj Techniques Limited 28 Trowers Way, Holmethorpe Industrial Estate Redhill, Surrey RH1 2LW UNITED KINGDOM tel: 01737 767493 fax: 01737 772041 email: [email protected] www.jbj.co.uk uk distributor for mfci COnCEflTRIC PRODUCT RANGE HE Powerpacks 12/24/48VDC0.3-4.5kWand 0.75-3 kWACmodular power packs HE Box Powerpacks 12/24/48VDCmodular powerpacks in weatherproof boxes Pressure Switches 5 - 350 bar, connecting/disconnecting W100 Hydraulic pumps 0,5-2,0cc227bar W300 Hydraulic pumps 0,8-5,7cc230bar W600 Hydraulic pumps / motors 3-12cc276bar W900 Hydraulic...