Catalog excerpts
COOLERS & HEAT EXCHANGERS Quality Products for Mechanical & Fluid Power
Open the catalog to page 1ACN and DCN Series Oil-Air Coolers with alternate current drives (3 x 400V) and direct current drives (12/24V) ACN » Compact oil-air cooler. » Aluminium matrix ensures high cooling / size ratio. » Low pressure drop. » Maximum dissipation 3.5 Kw / °C. » Max. flow 600 lpm. » Three phase or single phase versions available Including NEMA. » Reduced motor speeds aid low noise levels. » By-pass valve available on request. » Supplied complete with thermostat. AACN » Compact oil-air cooler Atex certified. » Maximum dissipation 3.8 Kw. / °C. » Low pressure drop. » Max. flow 540 lpm. » Three phase or...
Open the catalog to page 2OCN Offline Cooling Units AC drives with integrated hydraulic pump » Compact air-oil cooler for off-line applications. » Low noise level. » Cooling capacity of 1.5 Kw. / °C (higher levels on request). » Stand alone system. » Operating viscosities of up to 300 cSt. Cooler Bellhousings KPV Series » Bellhousing coolers for drain line or full flow cooling. » Dimensions according to the VDMA Standard. » Rigid and noise damping versions with identical lengths. » Will replace existing bellhousing mounted in systems. » Optional foot bracket allows horizontal mounting. » To connect metric frame...
Open the catalog to page 3Shell & Tube Heat Exchangers BAMNZ » Heat dissipation upto 2000Kw. » Accepts flow rates upto 2400 lpm. » Multipass versions reduce water requirements. » Enlarged oil connections ensure low system pressure drop. » Variety of materials available. » ASME, TEMA-C and ATEX certified versions. » Marine Approval - DNV, GL LLoyds etc. Oil-Water Safety Heat Exchangers BAMNZSC » Safety cooler gives protection against cross flow contamination. » Sealed double tube technology. » 100% electronic monitoring. » Removable cover allows ease of cleaning internal water pipes. » Variety of materials suit many...
Open the catalog to page 4Plate Heat Exchangers SPB & SPBT Brazed Plate Heat Exchangers » Compact alternatives to conventional Shell & Tube coolers. » Vacuum brazed units ensure system integrity. » High efficiency means reduced coolant requirement. » Small size allows for reduce pipe and space requirements. » Optimised performance delivers exact system requirements. » Reduced size and weight improves shipping costs. » Plates pressed in either AISI 316L with SMO 254 available on request. » Copper or Nickel braze suits all environments and applications. » Various pipe connections and accessories available. » Accept...
Open the catalog to page 5Cooling & Heat Exchange ACN/DCN Oil-Air Coolers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Off-line Air/Oil Coolers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BNZ Series Water/Oil Coolers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Screw-In Water/Oil Heat Exchanger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Open the catalog to page 6Cooling & Heat Exchange ACN/DCN Oil-Air Coolers ACN and DCN Oil-Air Coolers with Alternate Current Drives (3 x 400 V) and Direct Current Drives (12/24 V » Compact Oil-Air Cooler » High cooling capacity » High operating pressure » Low pressure loss » Low noise level » Also available with declaration of conformity according 94/9/EG ACN and DCN Oil-Air-Coolers For AC and DC power operation Materials Cooler: Aluminium, white aluminium RAL 9006 Cowling, feet: Steel, jet black RAL 9005 Fan: PPG (special material on request) Fan guard ACN: Steel, silver chromated Chrome (VI) free
Open the catalog to page 7Cooler DCN: Plastic fan material with integrated electric motor NewCool oil-air-coolers offer more than just compact design and high efficiency - the cooling units and fans fitted are also optimized to ensure that the coolers run with a minimum of noise. The current productrange consists of 11 sizes with cooling capacities between 4.4 kW and 140 kW at 40 °C inlet temperature differential, with one-pass or two-pass versions of unit sizes 5 to 60 available. Two versions in sizes 5 to 60 are available: one with low pressure drop, the other with high cooling performance. Our oil-air coolers are...
Open the catalog to page 8Cooling & Heat Exchange ACN/DCN Oil-Air Coolers Installation Single pass ACN/DCN Oil-Air-Coolers Installation notes; space requirements and fitting instructions. When installing the cooler, please ensure that the cooling air can flow in and out freely. The distance from the wall (A) should be equal to or greater than the height of the cooling unit (see Figure 1). Ensure that no other currents of air interfere with the cooling air flow of ACN and DCN Oil-Air-Coolers. If the cooler is operated indoors, there must always be an adequate supply of fresh air to prevent any negative effect on cooling...
Open the catalog to page 9Product Series *Size ACN-5 not available with IEC standard motor. **ACN-5 without mounting brackets X = One pass or two pass The specified noise level may vary by ±3 dB(A). This is due to possible reflections from surrounding objects, natural frequencies or similar. The noise measurements were conducted at half-spherical diffusion.
Open the catalog to page 10Product Series Technical Data Product Series The specified noise level may vary by ±3 dB(A). This is due to possible reflections from surrounding objects, natural frequencies or similar. The noise measurements were conducted at half-spherical diffusion.
Open the catalog to page 11^NewCoo/JDimensions Product Series Technical Data Product Series X = One pass or two pass Y =12 V or 24 V The specified noise level may vary by ±3 dB(A). This is due to possible reflections from surrounding objects, natural frequencies or similar. The noise measurements were conducted at half-spherical diffusion.
Open the catalog to page 12All Jbj Techniques Limited catalogs and technical brochures
-
PUMP DRIVE COMPONENTS
61 Pages
-
Shaft locking devices
92 Pages
-
HIGH/LOW, 2 STAGE / GEAR PUMPS
14 Pages
-
S-Flex Couplings
32 Pages
-
Hydraulic Gear Motors
56 Pages
-
Planetary Gearboxes
48 Pages
-
Yoke Drive Flywheel Couplings
14 Pages
-
Bearing Supported Stub Shafts
12 Pages
-
This is what we do
1 Pages
-
HQ series vane pumps
48 Pages
-
Pneumatic Starters
6 Pages
-
Hydraulic power take-off units
28 Pages
-
Gear pump summary
12 Pages
-
FLUID POWER ACCESSORIES
66 Pages
-
F15 Ferra Series
20 Pages
-
KT Pressure Switch
8 Pages
-
Rotary Gear Flow Dividers
16 Pages
-
W Series
8 Pages
-
GPA Series
18 Pages
-
jbj Coolers Summary
2 Pages
-
An excellence in engineering
1 Pages
-
PIPE FLANGES PORT FLANGES
102 Pages
-
TANKS / RESERVOIRS
22 Pages
-
PRESSURE INTENSIFIERS
22 Pages
-
SCREW PUMPS
50 Pages
-
HAZARDOUS AREAS SCREW PUMPS
24 Pages
-
SCREW PUMP RELIEF VALVES
14 Pages
-
BV Series VANE PUMPS
94 Pages
-
BQ Series VANE PUMPS
108 Pages
-
TQ and TV Series VANE PUMPS
36 Pages
-
HQ Series VANE PUMPS
38 Pages
-
B1 and B2 Series VANE PUMPS
10 Pages
-
All steel gear couplings
26 Pages
-
This is jbj Techniques!
28 Pages
-
Vane pumps
10 Pages
-
Fluid power accessories
54 Pages
-
Fluid reservoirs
22 Pages
-
pressure intensifiers
22 Pages
-
screw pumps
50 Pages
-
API 676 compliant screw pumps
24 Pages
-
Petrol engine adaptors
6 Pages
-
Torque limiting couplings
20 Pages
-
Torsional couplings
48 Pages
-
jbj PRODUCT SUMMARY
6 Pages
-
Equipment for Hazardous Areas
44 Pages
-
PDC
58 Pages