B1 & B2 Series VANE PUMPS

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS “B1/B2” SERIES Versatility, reliability, high long-term volumetric efficiency and low noise level are the hallmark of the B1 and B2 series of vane pumps. B1 and B2 pumps combine these qualities, with low running costs to offer a valid alternative to other types of pump for both industrial and mobile use, particularly where noise level must be kept low. B1 pumps are available in eight different versions (from 1 to 7 gpm at 1200 rpm), with maximum power of up to 18 kW; B2 pumps are available in seven different versions (from 6 to 13 gpm at 1200 rpm), with...

General description Fixed displacement vane pump, hydraulically balanced, with capacity determined by the type of ring used and the speed of rotation. The pump is available in eight different displacements, from 3.29 cc to 22.8 cc. Technical characteristics oil viscosity: 25 c.St. (10W), temperature: 45°C, inlet pressure: 0 BAR Pump type Geometric displacement Max pressure with mineral oil Speed range with min. oil (rpm) Hydraulic fluids: mineral oils, phosphate ester based fluids, water emulsions in oil, water-glycol fluids. Viscosity range (with mineral oil): from 13 to 860 cSt. (13 to 54 cSt....

single pump B1 Installation dimensions mm Pump length PORT ORIENTATIONS Pump type Approx. weight: 4,5-6,8 kg. (10-15 lbs.) Model code breakdown Nominal size Rotation (viewed from shaft end) L = left hand rotation (omit if right hand rot.) Inlet port connection B= 1" GAS threaded P= 1" NPT threaded S= SAE 1-5/16" 12 UNF-2B threaded 01 = Straight with square key (standard) 03 = Threaded with woodruff key 11 = Splined "SAE A" 9 teeth 16/32 Outlet port connection Outlet port positions B= 1/2" GAS threaded P= 1/2" NPT threaded S= SAE 3/4" 16 UNF-2B threaded (Outlet viewed from cover end) A = Outlet...

General description Fixed displacement vane pump, hydraulicaly balanced, with capacity determined by the type of ring used and the speed of rotation. The pump is available in seven different displacements, from 19.5 cc to 42.4 cc. Technical characteristics oil viscosity: 25 c.St. (10W), temperature: 45°C, inlet pressure: 0 BAR Pump type Geometric displacement Max pressure with mineral oil Speed range with min. oil (rpm) Hydraulic fluids: mineral oils, phosphate ester based fluids, water emulsions in oil, water-glycol fluids. Viscosity range (with mineral oil): from 13 to 860 cSt. (13 to 54 cSt....

OUTLET PQRT Pump length Model code breakdown Nominal size Inlet port connection - Outlet port connection - Rotation (viewed from shaft end) L = left hand rotation (omit if right hand rot.] 01 = Straight with square key (standard) 03 = Threaded with woodruff key - Outlet port positions (Outlet viewed from cover end) A = Outlet opposite inlet, B = Outlet 90° CCW from inlet, C = Outlet in line with inlet, D = 90° Outlet CW from inlet

B1/B2 Operating instructions Maximum speed: the maximum speeds given in this catalogue are valid for an atmospheric pressure of 1 bar (14.7 psi) and with ambient temperature in the range of +30°C to +50°C. Higher speeds than those given cause a reduction in the volumetric efficiency, due to cavitation phenomena in the inlet area inside the pump. Sustained excess speed causes a rapid deterioration of the internal components reducing the lifetime of the pump. Minimum speed: Refer to the technical characteristics table of the pump. However, it is possible to operate at lower speeds with certain...

jbj Techniques is a specialist supplier of high-quality products for the mechanical power transmission and fluid power sectors. The company offers a high level of in-house expertise plus a huge selection of products to meet a very broad range of customer applications. From mechanical drive & transmission provides a comprehensive and valued service to the solutions to industrial markets, power transmission and hydraulics industries. The including design engineering, company fields a UK-wide team of technical sales engineers to ensure that the business is close to its product supply customers,...

an excellence in engineering comprehensive range of components www.jbj.co.uk Gear Pumps/Motors Mini Power Packs Screw Pumps Vane Pumps Axial & Radial Piston Motors Pneumatic Motors & Starters Planetary Gearboxes Splitter Gearboxes LSHT Motors/Geared Motors Torsional Couplings Torsionally Flexible Couplings Torsionally Rigid Couplings Anti-static/Flameproof Couplings Tyre Couplings Permanent Magnetic Couplings Torque Limiting Couplings Hydraulic Adaptors Engine Adaptor Kits Pressure Intensifiers Flow Dividers Fluid Level Indicators Range of ATEX certificated You Tube quality products for mechanical...

jbj Techniques Limited 28 Trowers Way Holmethorpe Industrial Estate Redhill Surrey RH1 2LW. UNITED KINGDOM quality products for mechanical & fluid power jbj Techniques Limited is ISO certificated, committed to international coordination & unification of industrial standards. A range of products ATEX certificated to directive 94/9/EC requirements set by James Harris, jbj Techniques Limited