AM-B, AM-BD, AM-BDS installation, operation, maintenance

Product catalog summary

Specifications: The document outlines the AM units, which are PTO hydraulic pump drives with a 2-piece cast iron casing and case-hardened spur gears and shafts. The pump drive rotation is opposite to the input. The units offer flexibility with interchangeable pump mountings and drive couplings. There are three types: AM-B for independent mounting or close coupling to an engine, AM-BD for close engine coupling with an over-centre clutch, and AM-BDS for independent mounting with an over-centre clutch.

Selection Criteria: Selection should consider maximum input power and torque, ensuring individual pump drive torques are not exceeded. Specific flywheel and housing types are required for AM-B & AM-BD units, while AM-BDS units should avoid radial loads on the input shaft. For detailed selection data, consult jbj Techniques Limited.

Installation Guidelines: Proper mounting is crucial. For AM-B & AM-BD types, ensure correct axial and radial alignment between the clutch and engine. For AM-BDS, mount the unit with the shaft axis horizontal and on a common base with the prime mover. A coupling bore tolerance of N8 is recommended, and axial shock loads are not permitted.

Lubrication Instructions: AM units are supplied without oil and should be filled with EP90 gear oil before use. Replace the lubricant after the first 50-100 hours and subsequently every 1000-2000 hours or annually. Regular oil level checks are advised.

Cooling Requirements: The oil temperature should not exceed 95°C during continuous operation. An oil cooling system can be provided if necessary.

Maintenance Schedule: Bearings and cross shafts should be lightly greased every 300 hours, and release bearings every 100 hours for specific units. Use high-quality density 2 grease. Clutch adjustments may be necessary after considerable use.

Spare Parts Ordering: Provide the model, serial number, and item reference number when ordering replacement parts.

Contact Information: For further details or assistance, contact jbj Techniques Limited at their provided contact details.

Catalog excerpts

AM-B, AM-BD, AM-BDS installation, operation, maintenance-1

Installation, operation & maintenance TYPES AM-B, AM-BD & AM-BDS MULTIPLE PTO HYDRAULIC PUMP DRIVES Quality Products for Mechanical & Fluid Power

Open the catalog to page 1

AM-B, AM-BD, AM-BDS installation, operation, maintenance-2

multiple pto hydraulic pump drives Description: AM units consist of a 2-piece cast iron casing with case hardened spur gears and shafts. Pump drive rotation is opposite to input. The pump adaptors consist of interchangeable pump mountings and drive couplings providing great flexibility. There are 3 basic types of AM unit: AM-B for independent mounting or close coupling to engine by SAE housing and rigid or flexible coupling; AM-BD for close engine coupling with choice of over-centre clutch; AM-BDS for independent mounting with over-centre clutch. Selection: The unit must be selected taking account...

Open the catalog to page 2

AM-B, AM-BD, AM-BDS installation, operation, maintenance-3

types AM-B, AM-BD & AM-BDS Use high quality density 2 grease such as BP ENERGREASE LSEP2. DO NOT OVER-GREASE. Your jbj clutch is a quality unit with self adjustment capability to compensate for moderate wear. However after considerable usage manual adjustment will be necessary. Ensure that the clutch is adjusted correctly. If the lever requires a little effort to engage or if the clutch begins to slip, adjust immediately as follows: To adjust the clutch: set the lever in the release position. Remove the inspection cover (A19) and rotate clutch until the spring loaded pin (A36) becomes accessible....

Open the catalog to page 3

AM-B, AM-BD, AM-BDS installation, operation, maintenance-4

multiple pto hydraulic pump drives

Open the catalog to page 4

AM-B, AM-BD, AM-BDS installation, operation, maintenance-5

types AM-B, AM-BD & AM-BDS Spare Parts: When ordering replacement parts, quote model, serial number and item reference number as shown on exploded diagram.

Open the catalog to page 5

AM-B, AM-BD, AM-BDS installation, operation, maintenance-6

multiple pto hydraulic pump drives

Open the catalog to page 6

AM-B, AM-BD, AM-BDS installation, operation, maintenance-7

types AM-B, AM-BD & AM-BDS For further details/assistance please contact: jbj Techniques Limited 28 Trowers Way, Holmethorpe Industrial Estate, Redhill, Surrey RH1 2LW tel: 01737 767493 • fax: 01737 772041 • email: [email protected] • website: www.jbj.co.uk

Open the catalog to page 7

AM-B, AM-BD, AM-BDS installation, operation, maintenance-9

2014 comprehensive range of components www.jbj.co.uk Gear Pumps/Motors Mini Power Packs Screw Pumps Vane Pumps Axial & Radial Piston Motors Planetary Gearboxes Splitter Gearboxes Marine Gearboxes LSHT Motors/Geared Motors Torsional Couplings Torsionally Flexible Couplings Torsionally Rigid Couplings Hydraulic Adaptors Engine Adaptor Kits Pressure Intensifiers Flow Dividers ATEX Approved Range of ATEX certificated Extensive knowledge, extensive ability, extensive products. Customer needs are the centre of our business.

Open the catalog to page 9

AM-B, AM-BD, AM-BDS installation, operation, maintenance-10

jbj Techniques Limited 28 Trowers Way Holmethorpe Industrial Estate Redhill Surrey RH1 2LW. UNITED KINGDOM quality products for mechanical & fluid power 01737 767493 jbj Techniques Limited is ISO certificated, committed to international coordination & unification of industrial standards. [email protected] registered in England No: 1185469 www.jbj.co.uk A range of products ATEX certificated to directive 94/9/EC requirements set by James Harris, jbj Techniques Limited

Open the catalog to page 10