Key Features • Advanced Multipath Reduction • Fast acquisition channels • High accuracy velocity measurement • Almost unlimited altitude and velocity • SBAS/QZSS SAIF/BeiDou/ wide area code differential mode • Phase differential (RTK) Base/Rover • Support of upload of user geoid data TRH-G2P OEM board is based on our TRIUMPH Technology implemented in our 216-channels TRIUMPH Chip. The TRH-G2P board tracks GPS L1, Galileo E1, BeiDou B1, and QZSS L1. The on-board power supply on TRH-G2P OEM board accepts any voltage from +4.5 to +40 Volts and delivers clean filtered voltage where needed. This eliminates the risk of power contamination (ripples) that can be created when clean power is generated elsewhere and delivered to the board via cables. TRH-G2P provides UART interface and timing strobe. In addition, the board comes with large amount of flash for data storage. The dimensions are just 4x1 inches.

Data storage Memory Up to 256MB of onboard non-removable Raw Data Recording Up to 100 times per second (100Hz) Serial port Up to 460.8 Kbps, UART, Logical signals RTCM SC104 ver. 2.x and 3.x CMR/CMR+ 1 PPS synchronized to GPS, Galileo or UTC NMEA 0183 ver. 2.x and 3.0 Electrical On-board power supply accepts any unregulated voltage between +4.5 to +40 V DC Central pin power supply for LNA, +5 VDC and sourced current up to 0.12A (max) Power consumption 1 W (typical, without antenna current) GNSS Antenna Type External Physical & Environmental Digital connector Header, 2x7 pins, 2.00 mm pitch, 0.50...