*mydirectindustry

HPT404BT JL

Product catalog summary

Overview: The HPT404BT JL is a state-of-the-art 4 W UHF radio transceiver equipped with USB, Ethernet, Wi-Fi, and Bluetooth capabilities. It supports a wide UHF frequency range of 406 – 470 MHz and offers data speeds up to 38400 bps via UHF channels. The device is designed for high-speed wireless data transfer in both point-to-point and point-to-multipoint configurations.

Key Features:

Programmable UHF output power up to 4 W.
Advanced Forward Error Correction and selectable modulation techniques (GMSK, 4FSK, DBPSK, DQPSK, D8PSK, D16QAM).
Optional 3.5G cellular module and GPS L1 receiver.
Web interface for remote access and control.
Configurable serial port as RS-232, RS-422, or RS-485.

Specifications:

Operating Frequency Range: 406 - 470 MHz (varies by region).
Channel Bandwidth: Varies from 6.25 kHz to 25 kHz depending on region.
Data Rate: Up to 38400 bps with D16QAM modulation.
Roaming Speed: Up to 120 km/h for DBPSK modulation.
Maximum Distance Range: 16 miles / 26 km.

Transmitter and Receiver Specifications:

Output Power: Adjustable in 1 dB steps, with different maximums for USA/Canada and EU.
Receiver Sensitivity: Varies by modulation type, with DBPSK at -116 dBm for 25 kHz bandwidth.
Environmental: Operating temperature from -40°C to +70°C, IP67 rated.

Optional Modules:

3.5G Cellular Module: Supports multiple frequencies and data rates up to 21.0 Mbps downlink.
GPS Receiver: Tracks GPS L1 signals with a cold start time of 42 seconds.

Connectivity and Ports:

Wi-Fi (IEEE 802.11 b, g, n, d, e, i), Ethernet, Bluetooth V2.0+EDR Class 2.
High-speed USB 2.0, MicroSD card slot, and configurable serial ports.

Power and Dimensions:

Power Supply Voltage: +9 to +36 VDC nominal.
Power Consumption: 18W during transmission, 2W during reception, and 0.01W in sleep mode.
Dimensions: 5.75 x 2.95 x 1.73 inches (146 x 75 x 44 mm).
Weight: 1.07 lbs (488 g).

Variants:

Variant 1: Includes Bluetooth, WiFi, Ethernet, USB, and Serial port.
Variant 2: Adds 3.5G cellular data module and GPS receiver.

Catalog excerpts

HPT404BT JL is the up-to-date unsurpassed 4 W UHF radio transceiver with USB, Ethernet and Wi-Fi/Bluetooth® capacity. The unmatched features of HPT404BT include: • 406 - 470 MHz UHF frequency range • Wi-Fi Interface • Data speed via UHF channel up to 38400 bps • Bluetooth® Interface • Programmable UHF Output Power up to 4 W • 3.5G Cellular module (optional) • Advanced Forward Error Correction • GPS L1 receiver (optional) • High speed USB 2.0 device port • WEB interface for remote access and control • 100 Mb Ethernet port • Serial port configurable as RS-232 or RS-422, or RS-485 The HPT404BT JL radio transceiver provides a high-speed point-to-point and point-to-multipoint wireless data transfer at up to 38.4 kbps. HPT404BT JL firmware supports user selectable modulation techniques (GMSK, 4FSK, DBPSK, DQPSK, D8PSK, or D16QAM), which allows the user to achieve the highest data speed for a given range (up to 16 miles/26 km). It also includes a selectable error correction, which improves the functioning of the radio modem under interference. The sophisticated features of HPT404BT JL include data scrambling, frequency hopping, user selectable transmit output power level, low power consumption sleep modes, autoscanning for base and plug-and-play installation for remote terminals. HPT404BT JL could be a part of local/global network connected to Internet via WiFi, Ethernet, Bluetooth, or 3.5G cellular module (optional). HPT404BT JL provides a robust solution linking the field GNSS equipment to RTN, where no cell phone cover is available. HPT404BT JL can be configured and supported using web-interface through Internet, and this makes the setup mechanism simple and accessible from anywhere in the world.

Open the catalog to page 1

Web interface for communication, monitoring and setup HPT404BT JL devices from anywhere in the world. UHF Radio Transmitter Specification

Open the catalog to page 2

Variant 1: 4 W UHF Transceiver, Bluetooth, WiFi, Ethernet, USB and Serial port.Variant 2: 4 W UHF Transceiver, 3.5G cellular data module, GPS receiver, Bluetooth, WiFi, Ethernet, USB and Serial port. Communication ports Full-duplex 10BASE-T/100BASE-TX Ethernet port Bluetooth V2.0+EDR Class 2 High Speed USB 2.0 configurable as Device or Host port MicroSD card slot (fully sealed) Serial port configurable as RS232/RS422/RS485 Specifications are subject to change without notice JAVAD GNSS www.javad.comRev.1.0 February 18, 2015

Open the catalog to page 3

HPT404BT JL

HPT404BT JL

Catalog excerpts

All Javad GNSS, Inc. catalogs and technical brochures