Shoes collection 2017-18

Product catalog summary

Overview

This document from W. L. Gore & Associates GmbH provides detailed technical specifications, standards, and product information related to safety footwear, particularly focusing on materials, performance parameters, and compliance with EN ISO standards.

Materials and Technologies

Materials Used: Various polymers such as PU (Polyurethane), TPU (Thermoplastic Polyurethane), and specialized compounds like Lightane™ and AerFort are used in sole constructions.
Infinergy® E-TPU: Many products incorporate Infinergy® – an expanded thermoplastic polyurethane (E-TPU) known for energy return and cushioning.
Thickness and Density: Sole thickness ranges from 2.5 mm to 8 mm depending on the model, with bi-density constructions for enhanced performance.

Performance Parameters

Impact Resistance: Toe caps tested to withstand 200 Joules or 15 kN force.
Perforation Resistance: Minimum resistance of 1100 Newtons required.
Slip Resistance: Markings SRA, SRB, and SRC indicate slip resistance on ceramic and stainless steel surfaces with specific lubricants (water/detergent and glycerin). Required coefficients of friction are ≥0.32 (flat ceramic), ≥0.28 (inclined ceramic), ≥0.18 (flat steel), and ≥0.13 (inclined steel).
Energy Absorption: Heel area energy absorption must be ≥20 Joules.
Water Resistance: Whole shoe water penetration resistance (WR) requires no penetration within 15 minutes and limited penetration after 100 flexes. Upper water resistance (WRU) requires >60 minutes with absorbance <30%.
Electrical Properties: Antistatic (A) and conductive (C) properties with specific resistance ranges.
Thermal Resistance: Cold insulation (CI) for temperatures below 10°C and heat insulation (HI) for temperatures above 22°C.
Contact Heat Resistance: Sole must resist contact heat at 300°C for 60 seconds without melting (HRO).
Ankle Protection: Average force resistance >20 kN.
Metatarsal Protection: Height after shock >40 mm for size 42.
Cut Resistant Upper: L factor >2.5.

Standards and Markings

EN ISO 20345:2011: Specifies fundamental and additional requirements for safety footwear including toe protection, antistatic properties, energy absorption, and resistance to hydrocarbons.
EN ISO 20347:2012: Covers occupational footwear without toe protection, with class I (shoe) and class II (boot) distinctions.
Marking Symbols: SB, S1, S2, S3 denote increasing levels of protection and features such as closed heel, water resistance, and cleated soles.
Slip Resistance Symbols: SRA (ceramic + water/detergent), SRB (steel + glycerin), SRC (both conditions).

Product Index

The document includes an extensive index of product codes and model names (e.g., ALEXIA S3 SRC, AUDREY S3 SRC, JALACTIVE SAS S1P CI SRC) indicating a wide range of safety footwear models compliant with the described standards and technologies.

Critical Information Summary

Safety footwear must meet strict impact, perforation, slip resistance, and water resistance criteria as per EN ISO standards.
Use of advanced materials like Infinergy® E-TPU enhances energy return and comfort.
Electrical and thermal resistances are critical for specific occupational environments.
Markings on footwear provide quick reference to compliance and protective features.

Catalog excerpts

For over 70 years, Jallatte® has been positioned as a leader of safety footwear. Our research and development team works constantly; making use of new technologies and state of the art materials that contribute to the realisation of improved performance footwear. Quality, comfort and design are key elements of the footwear Jallatte produce through which we help to preserve the health and well-being of the individual which has always been our priority.

Open the catalog to page 2

GORE-TEX® FOOTWEAR FOR THE WORKPLACE. PROTECTION AND COMFORT. High climate comfort The GORE-TEX® membrane - the hidden secret at the core of GORE-TEX® Footwear offers high climate comfort in all working weather conditions. Water stays out while sweat escapes The GORE-TEX® membrane has microscopic pores 20,000 times smaller than a drop of water but 700 times larger than one water vapour molecule. This unique combination provides durable waterproofness and high breathability. GORE-TEX® Footwear keep your feet dry and comfortable. PRODUCT CLASSES. To meet the specific requirements of operational climate,...

Open the catalog to page 4

PROVEN QUALITY UNDER UNCOMPROMISING TESTING CONDITIONS. all phases of the product development and production. GORE-TEX® Footwear by far exceeds the requirements of the standard EN ISO 20345/347 with respect to waterproofness, breathability and durability. The materials used in GORE-TEX® Footwear achieve a breathability value up to six times higher than the values specifi ed in EN ISO standard 20345/47. GORE-TEX® Footwear has to withstand up to 300,000 fl ex movements (80 hours) in ankle-high water - without allowing one single drop of water to penetrate inside the boot. EN ISO standard 20344...

Open the catalog to page 5

Jallatte® strives to improve the well-being of workers with new technologies and solutions, dictated by more and more demanding restrictions. Jallatte® and BASF have combined their knowledge to offer you a new sole, the result of the latest collaboration of research and development, using a new high-performance material: BASF’s expanded thermoplastic polyurethane: E-TPl: Expanded Thermoplastic Polyl rethane Which is marketed under the name Infinergy®. Elastic like rubber but lighter, this innovative expanded TPU (E -TPU] combines, thanks to its closed cell technology, TPU properties with the...

Open the catalog to page 6

From running shoe to safety shoe, it's just one step! Already used with success in running shoes, this innovative material improved athletic performances, reducing fatigue. What if it was the same for the safety shoes users? For everyone who is exposed to arduous work situations: Standing for long periods Walking long distances Constant kneeling or squatting Up and down stairs repeatedly Repetitive stress Jallatte® creates the innovative sole : As a result of a unique technology Based on the world of sport k Greatly reduces fatigue Which deals with work stress nits and improve your performance!...

Open the catalog to page 7

• J-MODE/J-NUDE PU/TPU -MODE § |-nude PU/TPU The combination of polyu rethane midsole with ther mo polyurethane outsok is especially recommen ded for better performan ce and durability in all con ditions while enjoying the comfort and the look • GORE-TEX/J-ESCAPE/SPECIALS VIBRAM Decades of experience and excellence in sports climbing and serving today's world of work. The Vibram rubber sole is suitable for every situation, lightweight but extremely durable and high performance even in extreme conditions. TRIFTANE1* Softane PU/PU The special bi-density polyurethane SOFTANE is designed to achieve...

Open the catalog to page 8

SPRINGTANE 200 J Polymer toe cap Resistant to 200 J Nonmagnetic Athermic Elastic, in the case of crushing tends to recover its original shape facilitating the extraction of the foot. • XETANE 200 J CPJallatte createur de bien-etre Composite toe cap Resistant to 200 J Impact resistance +20% compared to the standard requirements Compression resistance +70% compared to the standard requirements Nonmagnetic Athermic FOOTBED • POLYJAL The new anatomical and antistatic insole made of soft polyurethane and covered in canvas open cell fabric breathable with antifungal and antimicrobial properties. The...

Open the catalog to page 9

Technology consisting of a superstructure grid made of TPU and designed for an enhanced support of the upper. Promoting the "seamless"concept, it contributes to an increased durability of the shoes.

Open the catalog to page 10

Special fiber that thanks to a specific finish features unique qualities: exceptional impermeability resistance to washing (even at 30 °) excellent breathability incredible ease of cleaning and maintenance. Products certified according to EN 61340-4-3 and EN 61340-5-1 for the protection of electronic devices from risks of electrostatic charges. (Table) tsu ELECTRICAL RESISTANCE TOWARDS THE GROUND IS BETWEEN 0,1 AND 35MOHM ESD - Electro Static Discharge ERA = ESD Protected Areas Areas where ESD equipment is mandatory Innovative technical lining that combines smoothness and softness together with...

Open the catalog to page 11

JALPUNCH SAS SIP Cl SRC UPPER Smooth suede leather with breathable Nylon fabric inserts JALPEPS SAS SIP Cl SRC UPPER Smooth suede leather with breathable Nylon fabric inserts LINING SILKTANE NEW TOE CAP PREM-Alu 200 J MIDSOLE POLYJAL ANTI-PERFORATION SOLE FleXtane™ HP by Jallatte®Zeramillimeters SOLE Consisting of soft E-TPU Infinergy® loam TOE CAP PREM-Alu 200 J MIDSOLE POLYJAL ANTI-PERFORATION SOLE FleXtane™ HP by Jallatte® Zeromillimeters SOLE Consisting of soft E-TPU Infinergy® foam NORM EN ISO 20345:2011. Antistatic JALACTIVE SAS SIP Cl SRC UPPER Smooth perforated suede leather JALRUN SAS...

Open the catalog to page 12

TOE CAP PREM-Alu 200 J MIDSOLE POLYJAL ANTI-PERFORATION SOLE FleXlane™ HP by Jallatte® Zeromillimeters SOLE Consisting of soft E-TPU Infinergy® foam TOE CAP PREM-Alu 200 J MIDSOLE POLYJAL ANTI-PERFORATION SOLE FleXtane™ HP by Jallatte® Zeromillimeters SOLE Consisting of soft E-TPU Infinergy® loam Smooth suede leather with breathable Nylon fabric inserts. With interchangeable coloured laces. INES SAS SIP SRC UPPER Textured technical fabric. With interchangeable coloured laces. LINING SILKTANE TOE CAP PREM-Alu 200 J MIDSOLE POLYJAL ANTI-PERFORATION SOLE FleXtane™ HP by Jallatte® Zeromillimeters SOLE Consisting...

Open the catalog to page 13