* Brevet International Water-repellent full-grain leather / textile J-ENERGY sole Infinergy ® de BASF Aluminum safety toe cap type B and midsole no metallic Dissipative ❖ Low safety shoe of urban sport type designed with anti-fatigue technology. Black and blue color. ❖ Safety shoe protecting the electronic devices against electrostatic discharge phenomena. Electrostatic dissipative shoes ESD Environmental Class II tested according to EN 61340-4-3 and EN 61340-5-1. ❖ Water-repellent full-grain leather and déperlant textiles upper. TPU insert built-in to the laces, ensuring an effective heel grip, enhanced alignment of the foot in the shoe and protection against any sprains. ❖ Breathable upper lining in 3D mesh, with honeycomb structure for improved all-round ventilation of the foot and fastdrying. ❖ Padded tongue for good instep protection, combined with two side bellows to prevent any dirt from getting into the boots. ❖ Padded ergonomic collar in compact flexible foam, lined for extra comfort and better ankle and Achilles tendon protection. ❖ Lace up on five pairs of eyelets. Black laces : 110 cm and a blue lace in the box. ❖ Soft+ Gel footbed made of BASF Dynamic polyurethane with heat sensitive memory foam and acts over the entire surface of the foot, cushions pressure points, improves weight distribution and shock absorption caused by impact with the ground. Anatomical, breathable and fitted with the Link ESDTM system, an innovative and multi-contact static electricity dissipater (Patent pending). ❖ This is a DGUV 112-191 certified model, with the option of swapping the hygienic insole provided for a SECOSOL® orthopaedic insole. ❖ PREM-Alu tip in aluminium type B resisting an impact of an energy of 200 joules. Minimum height after test ≥ 4mm in relation to the Type A toe cap in accordance with Standard 22568-1 : 2021. ❖ New manufacturing process : antiperforation inner sole and insert in FleXtane By Jallatte material, antistatic, 100% composite. Sewn directly onto the bootstrap and covering 100% of the foot for all-round protection. 100% composite materials : lighter than steel, non-magnetic, non-conductive of heat or cold. ❖ Heel stiffener to reinforce the heel seat. ❖ Innovative J-energy sole in bi-ingredient PU / and BASF Infinergy® E-TPU (Expanded Thermoplastic PolyUrethane) insert, with a remarkable capacity to reproduce more than 55% of the energy accumulated while walking in order to reduce fatigue and to prevent RSIs to the legs.  Outsole in Polyuréthane.  E-TPU insert at low density of 0.25. Slip resistance tests results EN Standard : EN ISO 20345 : 2011 • As elastic as rubber but lighter. Requirement SRC (SRA+SRB) • High resistance to abrasion and stretching. SRA Test ground : ceramic / lubricant : water • Good chemical resistance. and detergent • Long-term durability in a wide temperature range. On flat 0,62 (>0,32) – On the heel 0,48 (>0,28) • Dynamic performance in 3 phases: Shock Absorption SRB Test ground steel/lubricant : glycerine Accumulation of energy - Dynamic Return On flat 0,23 (>0,18) – On the heel 0,19 (>0,13) Poids Pointure Conditionnement Boites (mm) Cartons (mm) Non contractual document Copyright JAL