JALLIBER SAS ESD JYJY474
1Pages

Recycled Putek® PLUS upper J-ENERGY Biomass Balance sole with Infinergy® of BASF ESD / Dissipative Aluminum safety toe cap type B and midsole no metallic ❖ Urban sport-style safety shoe incorporating anti-fatigue technology. Black color. ❖ Safety shoe protecting the electronic devices against electrostatic discharge phenomena. Electrostatic dissipative shoes ESD Environmental Class II tested according to EN 61340-4-3 and EN 61340-5-1. ❖ Recycled Putek® PLUS upper (68% recycled polyester), high resistance to abrasion, waterproof and breathable. TPU insert at the heel for good holding and enhanced alignment of the foot in the shoe. ❖ Upper lined in breathable 3D Surf mesh (66% recycled polyester) with honeycomb structure to improve the peripheral ventilation of the foot, dries out rapidly. ❖ Padded tongue for good instep protection, combined with two side bellows to prevent any dirt from getting into the boots. ❖ Padded ergonomic collar in compact flexible foam, lined for extra comfort and better ankle and Achilles tendon protection. ❖ Lace up on 4 pairs of non metallics eyelets and 1 lace-loop. 2 Flat laces : 120 cm, black and green. ❖ SOFT Respect footbed made of PU Dynamic Biomass Balance de BASF® cushions pressure points, improves weight distribution and absorbs heel impact. Anatomically shaped, perforated and equipped with the innovative Link ESDTM multi-contact static dissipation system. ❖ This is a DGUV 112-191 certified model, with the option of swapping the hygienic insole provided for a SECOSOL® orthopaedic insole. ❖ PREM-Alu tip in aluminium resisting an impact of an energy of 200 joules. Minimum height after test ≥ 4mm in relation to the Type A toe cap in accordance with Standard 22568-1:2021. ❖ Stab-resistant structural insole and liner in FleXtane By Jallatte ESD (50% recycled polyester) in compliance with standard 22568-4 : 2021, antistatic, 100% composite. Sewn directly onto the upper and covering 100% of the foot for total protection. ❖ Heel stiffener to reinforce the heel seat. ❖ Innovative J-Energy sole in PU / PU of BASF® BMB  Biomass Balance Certified EU-REDcert² (Expanded Thermoplastic PolyUrethane) and E-TPU Expanded Thermoplastic PolyUréthane, Infinergy ® of BASF® insert, with a remarkable capacity to reproduce more than 55% of the energy accumulated while walking in order to reduce fatigue and to prevent RSIs to the legs. Slip resistance tests results EN Standard : EN ISO 20345 : 2011 Requirement SRC SRA Test ground : ceramic / lubricant : water and detergent On flat 0,62 (>0,32) – On the heel 0,48 (>0,28) SRB Test ground steel/lubricant : glycerine On flat 0,23 (>0,18) – On the heel 0,19 (>0,13) Weight Size Packaging Box shoes (mm) Cartons (mm) • 100% substitution of fossil resources with renewable and sustainable raw materials. • Independently certified approach. • Reduction of greenhouse gas emissions. • Same properties and quality level as traditional safety shoes. Non contractual document Copyright J