tkJAKSA SOLENOID VALVES POWER SAVING SOLENOIDS 29.2 BO Connector: Form A - EN 175301-803 / ISO 4400 / ex-DIN 43650 TM35P 34 53 Connector: Form A - EN 175301-803 / ISO 4400 / ex-DIN 43650 Features • with built-in power saving electronic circuit • power consumption reduced by up to 95% • rated power 0.3 to 1 W • lower operating costs • extended life due to reduced heating • preserved flow and pressure ratings of the valve • compatible with most of our solenoid valve range • quiet AC operation • available voltages: 9, 12, 24, 48, 115 and 230 V • minimum off time between two cycles: 1 s

Connector: Form B - EN 175301-803 / ISO 6952 / ex-DIN 43650 Connector: Form A - EN 175301-803 / ISO 4400 / ex-DIN 43650

Connector: Form A - EN 175301-803 / ISO 4400 / ex-DIN 43650 33 Connector: Form A - EN 175301-803 / ISO 4400 / ex-DIN 43650

2. EXPLOSIONPROOF SOLENOIDS - rating II 2 G Ex e mb IIC T4/T5 Gb (with ATEX certificate) Suitable for any JAKSA solenoid valve. -40°C versions also available. Special feature: encapsulated tube fuse for added safety and ease of use. EC Type Examination Certificate IECEx Certificate of Conformity Production Quality Assesment Notification Data sheet and instructions for use - 7th issue 2017-06-28 JAKSA d.o.o. Slandrova 8, SI-1231 Ljubljana, Slovenia, EU tel.: +386 1 537 30 66 fax: +386 1 537 30 67 e-mail: [email protected] www.jaksa.si

3. SOLENOIDS FOR EXTREMELY HUMID AMBIENTS - rating IP67 Cable: PVC 3 x 0.75 mm2 x 3 m length (Other lengths available on request) Cable: PVC 3 x 0.75 mm2 x 3 m length (Other lengths available on request)

4. SOLENOIDS WITH DIN 72585-A1-2.1 CONNECTOR Cable: PVC 3 x 0.75 mm2 x 0.5 m length (Other lengths available on request)

Set consists of O-rings or profiled seals and brass nut. Seals are placed onto solenoid base, under and above solenoid and fixed with brass nut. Properly fitted sealing set prevents damp intrusion into solenoid. • M3 bolt and NBR gasket included. • Ambient temp. -25° to +80°C. • Cross section of conductor 0.5 - 1.5 mm2 • Cable not included.