2/2 TOTAL ISOLATION SOLENOID VALVES

1 / 2 PagesView full catalog

2/2 TOTAL ISOLATION SOLENOID VALVES

Product catalog summary

Technical Specifications:

Internal parts are not in contact with fluid.
Seals available in NBR, EPDM, and FPM.
Fluid temperature range: -10°C to +75°C.
Maximum ambient temperature: +55°C.
Viscosity limit: 21 mm²/s.
Response times between 10 - 20 ms.
Voltage options: 230, 115, 48, 24 V AC; 24, 12 V DC.
Continuous duty cycle (ED100%).
Cycling rate: 10 - 100 cycles/min.
Electrical protection: IP65 with ISO 6952 / ISO 4400 plug.
Sealing sets recommended for long-term use in humid environments.

Valve Models and Specifications:

Valves are closed when de-energized (NC) with various port sizes and materials.
Body materials include PA, PP, and PTFE with corresponding seals.
Mass ranges from 0.12 kg to 0.54 kg depending on the model.
Models include DL4PA, DL6, DL11, and others with specific order codes.

Pinch Valves:

Open when de-energized (NO) with options for vacuum applications.
Available in different sizes and configurations, including diverter (NC/NO) models.
Pinching force and mass vary by model, with specific coil types and power requirements.

Options:

Explosion-proof coils (EEx me II).
Custom versions available upon request.

Catalog excerpts

SOLENOID VALVES 2/2 TOTAL ISOLATION SOLENOID VALVES 3/8" - 3/4" TECHNICAL DATA: • Internal parts: none in contact with fluid • Seals: NBR, EPDM, FPM • Fluid temperature: -10°C to +75°C • Ambient temperature: max +55°C • Viscosity: max 21 mm2/s • Response times: 10 - 20 ms • Voltage: 230, 115, 48, 24 V AC; 24, 12 V DC • Duty cycle: continuous (ED100%) • Cycling rate: 10 - 100 cycles/min • Electrical protection: IP65 (with plug to ISO 6952 / ISO 4400) Long term use in humid environment requires the use of sealing sets. Closed when de-energised (NC) Closed when de-energised (NC) Miniature PTFE body Closed when de-energised (NC) All wetted parts made of PTFE

Open the catalog to page 1