2/2 DIRECT ACTING VALVES 1/8” - 1/2” TECHNICAL DATA: • Internal parts: stainless steel • Seals: NBR, EPDM, FPM, PTFE • Fluid temperature: -10°C to +90°C (NBR); +130°C (EPDM, FPM, PTFE) • Ambient temperature: max +55°C • Viscosity: max 21 mm2/s • Response time: 10 to 20 ms • Voltage: 230, 115, 48, 24 V AC / 24, 12 V DC • Duty cycle: continuous (ED100%) • Cycling rate: max 1000 cycles/min • Electrical protection: IP65 (with plug to ISO 6952 / ISO 4400) Long term use in humid environment requires the use of sealing sets. A Closed when de-energised (NC) Orifice Kv (water at 1bar) Differential size [mm] [l/min] pressure [bar] min * INOX body available. Coil type Order code Brass Brass Brass* Brass Brass Brass Brass Brass* Brass Brass* Brass Brass* Brass* Brass Brass* Brass* Brass INOX PA Brass Brass* Brass* Brass Brass

Open when de-energised (NO) Kv (water at 1bar) Differential [l/min] pressure [bar] Coil type Order code Brass Brass Brass Brass Brass Brass Brass Brass OPTIONS: • EEx me II explosionproof coils • INOX body • NPT ports • Other versions on request.