• Drive Technology • all-stainless steel version up to 350°C • wear and maintenance free • very short and variable design • torsionally stiff • simple installation with clamping hub technical data: MKG- Tn moment torsional max. shaft axial lateral mass VA of inertia stiffness misalignment [mm] spring rate spring rate approx. [Nm] [kgmm2] [Nm/arcmin] axial ± lateral [N/mm] [N/mm] [g] max. operational speed: 20.000 Upm temperature range: -40°C up to +350°C notes: connection between bellows and hub by plasma welding. Three standard versions with 6-corrugation bellows 6W, 4-corrugation bellows 4W or 2-corrugation bellows 2W. Size 1.5 with 5-corrugated metal bellows. Dimensions [mm]: length dimensions according to DIN ISO 2768 cH • clamping hubs generally with stainless steel screws A4-80 without EASY-pin - mind reduced actuation torques • check transmission torques of hub-shaft connection for diameters below Dmin (further inquiry possible) • alternative lenghts or hub versions available on request order example: MKG-VA 4 / 4W D1 = 8 G7 D2 = 11 G7 - stainless steel screws