*mydirectindustry

Datasheet SKY-KP

Product catalog summary

Overview: The document provides technical specifications for the SKY-KP series safety couplings designed for direct drives. These couplings are used to protect mechanical systems by disengaging under excessive torque conditions.

Specifications: The document lists various sizes of the SKY-KP series, detailing their static disengagement torque, moment of inertia, mass, torsional stiffness, and displacement capabilities. The sizes range from 1 to 2000, with disengagement torque from 0.5 Nm to 2000 Nm. The couplings are made from heat-treated steel, high tensile aluminum, and stainless steel, suitable for temperatures from -30°C to +200°C.

Dimensions: Dimensions are provided for each size, including diameter and length measurements, following DIN ISO 2768 cH standards. The document notes that alternative bellows lengths are available upon request.

Technical Features: The couplings feature a bellow attachment for direct drives, a conical clamping hub for small shaft diameters, and an EASY-clamping hub for misalignment compensation with low restoring forces.

Ordering Information: An example is provided for ordering, specifying the coupling size, shaft diameters, and disengagement torque. The document also notes that for sizes 1 to 45, ISO 4762 standards apply, with reduced tightening torque for diameters greater than 35 mm and 42 mm.

Additional Notes: The document mentions that the bellows side with a conical hub can handle disengagement torque up to 9000 Nm, as seen in the SKY-KS series.

Catalog excerpts

with bellow attachment for direct drives / with conical clamping hub for small shaft diameters bellowside with EASY - clamping hub compensation of misalignments low restoring forces SKY static disengage- moment mass torsional max. shaft tightening torque 0 D1 0D2 - KP ment torque of inertia approx. stiffness displacement [mm] of screws min max min max size TKA[Nm] [10-3kgm2] [kg] [Nm/arcmin] axial ± lateral „f“ [Nm] „i“ [Nm]* * sizes 1 - 45: ISO 4762 - ** Note: reduced tightening torque for D > 0 35 | D > 0 42 * Note: - alternative length of bellows are possible on request - bellowside with conical hub and disengagement torque up to 9000Nm see series SKY-KS

Open the catalog to page 1

Datasheet SKY-KP

Datasheet SKY-KP

Catalog excerpts

All JAKOB Antriebstechnik GmbH catalogs and technical brochures