*mydirectindustry

Datasheet MSP / MSPD

Product catalog summary

Overview: This document provides technical specifications for clamping elements, specifically the MSP and MSPD series of Mechanical Power Clamping Screws. These are designed for external and internal clamping directions, respectively.

Specifications:

Available sizes: 50, 65, 80, 100, 120, 160, 200.
Thread type: ISO-trapezoidal thread, left-hand, single start.
Material: Heat-treated steel, nitro carburized.

Performance Parameters:

Nominal clamping force (external): Ranges from 100 kN to 600 kN depending on size.
Nominal clamping force (internal): Ranges from 70 kN to 480 kN.
Nominal actuation torque: Ranges from 60 Nm to 220 Nm.
Maximum static load: Ranges from 150 kN to 1800 kN.

Dimensions:

Stroke (h): 2 mm to 3 mm.
Operating travel (s): 7.5 mm to 27 mm.
Hexagon sizes for external and internal applications vary by size.

Customization: Special thread sizes or customized dimensions are available upon request. Sizes 120, 160, and 200 can be equipped with a more powerful clamping force amplifier.

Ordering Information: Example format: MSPD 100 - TR 100 x 6 - LH - L1 = 300 mm.

Catalog excerpts

• Clamping Elements A_nik • Series MSP - Mechanical Power Clamping Screw for clamping direction “external” • Series MSPD - Mechanical Power Clamping Screw for clamping directions “internal and external“ clamping direction heat treated steel - nitro carburized Technical data and dimensions [mm]: length dimensions according to DIN ISO 2768 mH Note: • special thread sizes or customized dimensions are possible upon request • sizes 120 / 160 / 200 are also available with more powerful clamping force amplifier Ordering example: MSPD 100 - TR 100 x 6 - LH - L1 = 300 mm

Open the catalog to page 1

Datasheet MSP / MSPD

Datasheet MSP / MSPD

Catalog excerpts

All JAKOB Antriebstechnik GmbH catalogs and technical brochures