*mydirectindustry

TD63 EPDMperformance C34

Product catalog summary

Overview: The document provides technical specifications and operational guidelines for the JetFlex® Tube Diffuser TD 63, specifically the EPDM performance C34 model. It includes details on oxygen transfer efficiency, headloss, material composition, installation, maintenance, and storage recommendations.

Specifications:

Types and Air Flow Rates: The TD 63 series includes models 2100, 2075, and 2050, with standard air flow rates ranging from 1 to 12 m³/h and maximum overload rates up to 20 m³/h.
Operating Conditions: Suitable for intermittent and continuous operation in municipal wastewater, with an operating temperature range of 0-80°C.
Materials: The diffuser components are made from EPDM, PP, and stainless steel, ensuring durability and performance.

Installation and Dimensions:

Perforation and Total Length: Varies by model, with perforation lengths of 500-1000 mm and total lengths of 560-1060 mm.
Connector Specifications: Includes details on connector types, color codes, and dimensions for installation.

Performance and Maintenance:

Oxygen Transfer Efficiency (SOTE): Tested under specific conditions with a measuring tolerance of +/- 1%.
Headloss: Internal tests show tolerances of +/- 5%.
Maintenance: Regular cleaning with formic acid and periodic maximum airflow usage recommended to maintain diffuser condition.
Membrane Lifetime: Expected to exceed 5 years in municipal wastewater treatment plants.

Storage Recommendations: Store in a dark, dry, ventilated space, avoiding frost, heat, and UV exposure. Rubber parts should not be stored outdoors and should remain in original packaging until installation.

Disclaimer: The document notes that the information provided is based on current knowledge and does not guarantee specific product properties or suitability for particular applications.

Catalog excerpts

Data Sheet JetFlex® Tube Diffuser - TD 63 Jaeger Group of Companies

Open the catalog to page 1

Installation drawing Header Connector Tube Diffuser Sleeve Dimensions Perforation length (B) Tube diameter Wall thickness Perforated area Total weight Air flow Air flow rate at standard operation conditions max overload/ maintenance air flow rate Operating temperature Operation mode intermittent continuous municipal waste water intermittent continuous municipal waste water intermittent continuous municipal waste water of operation is highly recommended for air flow rates lower than minimum rate. air flow rate (e.g. cleaning) should not be applied longer than 10 min/day. • Numbers are for guidance...

Open the catalog to page 2

Specifications Dimensions for threads and Connector Connector length square tube 80 x 80 mm blue green grey Hole diameter for connector Colour code Connector length square tube 100 x 100 mm Membrane material Type Colour Polymer Carbon black Plasticiser Others Density Tensile strength Elongation at break Tear strength Hardness Materials Material Sleeve Material Tube Material Diffuser Head V2A (Stainless Steel 1.4301) SS 304 (Others on request) 4 mm EPDM (Others on request) Shipping unit Shipping unit Dimensions LxWxH Unit weight Pallet size Pallet weight

Open the catalog to page 3

Specifications Standard oxygen transfer efficiency (SOTE) and headloss for TD63 EPDMperformance C34 1000 mm Oxigen transferefficiency and headloss Tube Diffusor: TD63 / 2100 / 0 / C34 Water depth Submergence depth Test media Test tank tap water bubble column Atmospheric pressure Water temperature Tank volume Tank floor area CSS,T Test conditions SOTE acc. to German Standard DWA M 209 (desorption method) Certificate ISAH, University Hanover, measuring tolerance +/- 1% Headloss internal tests tolerances +/- 5% Storage: • Diffuser and/or rubber sleeves must be stored factory-packed in a dark, dry,...

Open the catalog to page 4

All Jäger Umwelt-Technik GmbH & Co. KG catalogs and technical brochures

Archived catalogs

Waste Water Aeration
13 Pages
Waste Water Aeration Disc diffuser - Tube diffuser - Strip diffuser
13 Pages