TD-65-2-G1 EPDMperformance J34

Product catalog summary

Overview: The document provides technical specifications and operational guidelines for the JetFlex® Tube Diffuser TD 65-2-G1, designed for municipal wastewater treatment. It includes details on air flow rates, dimensions, materials, and maintenance recommendations.

Specifications:

Air Flow Rates: The diffusers operate at standard air flow rates ranging from 1 to 12 m³/h, with a maximum overload rate for maintenance purposes.
Operating Temperature: Suitable for temperatures between 0°C and 80°C.
Operation Mode: Can be used intermittently or continuously.

Dimensions and Materials:

Perforation Length: Available in 1000 mm, 750 mm, and 500 mm lengths.
Materials: EPDM for the membrane, PP for the sleeve and tube, and stainless steel for connectors.

Installation and Maintenance:

Diffusers should be stored in a dark, dry, and ventilated space to prevent damage.
Regular maintenance includes cleaning with formic acid and ensuring maximum air flow for short durations to maintain performance.

Performance:

Oxygen Transfer Efficiency (SOTE): Tested under specific conditions with a measuring tolerance of +/- 1%.
Headloss: Internal tests show tolerances of +/- 5%.

Additional Information: The document includes a disclaimer about the general nature of the information and the need to observe industrial property rights.

Catalog excerpts

Data Sheet JetFlex® Tube Diffuser - TD 65-2-G1 Jaeger Group of Companies

Open the catalog to page 1

Installation drawing Header Connector Tube Diffuser 35 mm hole diameter left/right Dimensions Perforation length (B) Tube diameter Wall thickness Perforated area Total weight Air flow Air flow rate at standard operation conditions max overload/ maintenance air flow rate Operating temperature Operation mode intermittent continuous municipal waste water intermittent continuous municipal waste water intermittent continuous municipal waste water of operation is highly recommended for air flow rates lower than minimum rate. air flow rate (e.g. cleaning) should not be applied longer than 10 min/day....

Open the catalog to page 2

Specifications Dimensions for threads and connector Connector length square tube 80 x 80 mm [C] Connector length tube DN100 (114,3 mm) Colour code Connector length square tube 100 x 100 mm [C] Membrane material Type Colour Polymer Carbon black Plasticiser Others Density Tensile strength Elongation at break Tear strength Hardness Materials Material Sleeve Material Tube Material Diffuser Head Shipping unit Shipping unit Dimensions LxWxH Unit weight Pallet size Pallet weight

Open the catalog to page 3

Standard oxygen transfer transferefficiency and headloss and headloss efficiency (SOTE) Oxigen Tube Diffusor: TD63 / 2100 / 7312 / 0 / J34 for TD 65-2-G1 EPDMperformance J34 12 Water depth Submergence depth Test media Test tank tap water bubble column Atmospheric pressure Water temperature Tank volume Tank floor area CSS,T Test conditions SOTE acc. to German Standard DWA M 209 (desorption method) Certificate ISAH, University Hanover, measuring tolerance +/- 1% Headloss internal tests tolerances +/- 5% Storage: • Diffuser and/or rubber sleeves must be stored factory-packed in a dark, dry, ventilated...

Open the catalog to page 4

All Jäger Umwelt-Technik GmbH & Co. KG catalogs and technical brochures

Archived catalogs

Waste Water Aeration
13 Pages
Waste Water Aeration Disc diffuser - Tube diffuser - Strip diffuser
13 Pages