Hydraulically Actuated Diaphragm Metering Pumps 0.86-56 GPH Flow Rate 250-1,200 PSIG Pressure • Specially designed for accurate, completely leak-proof metering of difficult-to-handle liquids. • Available in simplex and duplex FEATURES & BENEFITS • Separate chambers for hydraulic fluid and gear lubricant make possible the use of the best medium for hydraulic diaphragm pulsing and the best medium for gear lubrication. The results are better pump performance and longer pump life. • Available in both simplex and duplex models. Field convertible from simplex to duplex. • Patented, heavy-duty gear reducer system for superior performance. • Hydraulically actuated diaphragm minimizes diaphragm fatigue. • Built-in hydraulic relief valve protects the pump. • Stroke rate easily automated using variable-speed drive. • Capacity is adjustable while pump is running or idle. • Capacity is adjustable for a turn-down ratio of 10:1. • Easy-to-read stroke length adjustment dial. • Available with or without motor. • No plunger seals to leak or replace. • Oil bath gear lubrication eliminates the maintenance required by packing grease PUMP OPTIONS • Double ball check valves with or without spring-loaded balls. • Double diaphragms with diaphragm rupture detection eliminates process fluid contamination or pump housing damage in the event of a diaphragm rupture. MOTOR OPTIONS • Top-mounted lube oil and hydraulic fluid fill ports for easy access. • Single ball check valve, standard on both suction and discharge side of the pump, • Pressure relief valves • Back pressure valves • Calibration columns • Pulsation dampeners • Pressure gauges • Accuracy of ± .5% at steady state. • All units come epoxy painted, completely assembled on a base plate and have provides accurate metering and fast response. Valve ball turns with fluid flow, constantly presenting a new face to the seat, and therefore is self-cleaning. been fully tested. MATERIALS 316 Stainless Steel PVC Alloy 20 Haste

JAECOFRAM 1™ MODELS MAXIMUM CAPACITY (2) MODEL # PSIG KG/CM PSIG KG/CM2 Speed in strokes per minute Liquid End Material 2 - 316 Stainless Steel 3 - Alloy 20 4 - Hastelloy-C 7 - PVC Motor Horse Power 2 - 1/3 HP 3 - 1/2 HP Y - less motor Options: Consult factory 1. Jaeco model numbers consist of 10 digits. See explanation. 2. Flow rates are for water at 100 PSI. Derate flow by 1.5% for each 100 PSI thereafter. 3. This pump requires an 1140 rpm motor. 4. For plastic construction, maximum pressure is 150 PSI. Maximum temperature is 140°F. 5. For steel construction, maximum temperature is 350°F. Determine...