Hydraulically-Actuated Diaphragm Metering (Injection) Pumps 6.9-56 GPH Flow Rate Pressures up to 1,000 PSIG • Specially designed for accurate, completely leak-proof metering of difficult-to-handle liquids. • Available in simplex and duplex FEATURES & BENEFITS • Separate chambers for hydraulic fluid and gear lubricant make possible the use of the best medium for hydraulic diaphragm pulsing and the best medium for gear lubrication. The results are better pump performance and longer pump life. • Pumps can run dry without pump failure. • Patented, heavy-duty gear reducer system for superior performance. • Hydraulically-actuated diaphragm minimizes diaphragm fatigue. • Built-in hydraulic relief valve protects the pump. • Rate of injection is manually adjustable while pump is running or idle. • Rate of injection is adjustable for a turn-down ratio of 10:1. • Accuracy of ± .5% at steady state. • Easy-to-read stroke length adjustment dial. • No plunger seals to leak or replace. • Single ball check valve, standard on both suction and discharge side of the pump, provides accurate metering and fast response. • Complete with single-phase or three-phase motor. • Additional motor options available. • All units come epoxy painted, completely assembled on a base plate and have been fully tested. SULFURIC ACID/INFURIC APPLICATIONS • For those special applications of applying Sulfuric Acid or Infuric, the recommended materials of construction are Alloy 20 or PVC. MOTOR OPTIONS • Single or Three Phase • 12V DC • Variable Speed Motor Drive • V-Belt • Gasoline • Pressure relief valves • Calibration columns • Back pressure valves • Pulsation dampeners 316 Stainless Steel - Standard PVC - Standard Alloy 20 - Optional Hastelloy-C - Optional

JAECOAGRI-FRAM™ MODELS MODEL # MAXIMUM CAPACITY (1) SIMPLEX GPH 1. Capacities with 1/3 HP motor at 1725 rpm. 2. Flow rates are based on water at maximum rated pressure. These are the most common size agricultural pumps. Other sizes and materials available. Determine type of Jaeco pump to use. Select appropriate model from capacity/pressure chart. Or, contact your Jaeco representative with the following information: fluid name, concentration and compatibility; fluid properties – viscosity, temperature, vapor pressure, particle matter size and percent; maximum and minimum operating capacities and...