1. Catalogs
  2. Jabsco
  3. Specialty Products

Specialty Products

Specialty Products
1 / 12 PagesView full catalog

Specialty Products

Product catalog summary
Flangemount and Flexmount Blowers
Flangemount blowers are designed for mounting with the discharge port attached to a flat surface, reducing the need for ducting. They are available for both international and US markets, with standard models for intermittent service and commercial models for continuous service. Flexmount blowers offer flexible duct connections and can be rotated for directional discharge, also available in standard and commercial duty ratings.
Model Specifications
The document details various blower models, specifying air flow, voltage, amperage, fuse size, inlet and outlet dimensions, and weight. Models are available in standard and commercial duty, with options for 115V AC, 12V DC, and 24V DC voltages.
Applications
Blowers are used in applications such as race car, bus, and prison van ventilation, inflating signs and mascots, tanning booths, and building ventilation. A safety note warns against using these blowers where flammable vapors are present due to explosion risks.
Rule® In-line Blowers
These blowers are designed for high output and efficient operation, featuring corrosion-resistant motor housings and sealed motor shafts. They provide high air flow, low amp draw, and quiet operation, complying with USCG and IMCI standards.
Bottled Water Systems
The document describes single and dual inlet bottled water systems for beverage dispensing, ideal for locations without plumbing. These systems use bottled water and a pump to provide pressure, with the dual inlet system connecting two bottles for more capacity and less frequent changes. An appliance controller prevents appliances from running dry.
Appliance Controller
The appliance controller protects appliances by shutting them off when water is low, preventing damage. It features audible alarms for various conditions and is suitable for food service and industrial applications.
Oil Changers
The Porta-Quick portable oil changer and the permanent oil changer system facilitate easy and clean oil changes. The permanent system includes a manifold with ball valves for multiple oil reservoirs, allowing for both removal and refilling of oil.
Specifications
  • Body: Bronze or Polypropylene
  • Impeller: Nitrile
  • Shaft Seal: Lip Type
  • Voltage: 12 or 24 Vdc
  • Motor: Reversible with integral reversing switch
  • Container: Plastic with 14 quart (13.25 liter) capacity
  • Power Cord: 8 feet with alligator clips
  • Suction Hose: 4 feet (1.21 meter) of neoprene hose with 40 inch (1.16 meter) Teflon dipstick probe
  • Dimensions: 13.5 in (800.10 mm) diameter; 13.625 in (346.08 mm) high
  • Weight: 9 lb (4.1 kg)
Models
  • Model #17850-1012: 12VDC, 7 AMP, 10 AMP fuse
  • Model #17860-0012: 12VDC, 4 AMP, 5 AMP fuse
  • Model #17860-0024: 24VDC, 3 AMP, 5 AMP fuse
Specialty Products
  • Oil Changers: Extracts up to 50 weight of oil at 70°F (21°C) through the engine’s dipstick tube in less than 5 minutes.
  • Electric Winches: Features include 3-stage planetary gears, corrosion-resistant die-cast drums, and lifetime lubrication. Models vary by capacity and features such as remote control and cable length.
Conversion Data
  • Various conversion factors for units such as volume, length, and weight are provided, including conversions between metric and imperial units.
See more

Catalog excerpts

Specialty Products-2

Specialty Products Blowers Rule® In-Line Blowers | FOR InternationaL & US MARKETS Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. applications • • • • • • Race cars ventilation, race car driver helmet ventilation Bus ventilation (engine fumes, bathroom fumes) Prison van ventilation (cooling, air freshening) Blow up signs &...

 Open the catalog to page 2
Specialty Products-3

Specialty Products Bottled Water Systems Bottled Water Solutions for Beverage Dispensing There are many situations where portable potable water is needed for a variety of drink dispensers in locations where filtered water is not available. A good example is a portable coffee station. These are often moved into ideal locations for conferences, meetings, or other specific events, but those convenient locations often don’t have plumbing for water. Even businesses that want a permanent installation may not want to incur the cost of installing plumbing to the desired location. A common solution in...

 Open the catalog to page 3
Specialty Products-4

Specialty Products Bottled Water Systems SINGLE INLET BOTTLED WATER System | FOR InternationaL & US MARKETS At just 6" (152.4 mm) x 8" (203.2 mm) the Flojet Single Inlet Bottled Water Dispensing System is the most compact system you can buy and it's the most affordable. FEATURES • Float switch for automatic shut-off • Built-in Check Valve to prevent back flow • Universal seal cap • Easy mounting and installation • Upgrade kits are available • 20' (6.1m) 0.250" (0.5cm) OD discharge hose included Kits • Dual inlet suction kits (convert single inlet to dual inlet) PN# 21000633A • Appliance controller...

 Open the catalog to page 4
Specialty Products-5

Specialty Products Bottled Water Systems DUAL INLET BOTTLED WATER | FOR InternationaL & US MARKETS FEATURES • • • • • Exclusively from ITT Flojet Simultaneously draw from two bottles Patented "T" design Available in appliance controller interface configuration Backward compatibility to ITT Flojet’s single Inlet BW system kits available • Built-in check valve to prevent back flow • Universal seal cap • Easy mounting and installation • 20' (6.1m) 0.250" (6.35mm) OD discharge hose included Kits SPECIFICATIONS Voltage 115 VAC & 230 VAC,12 VDC Cycles 50/60 Hz. for AC Models Current 115 VAC 230 VAC...

 Open the catalog to page 5
Specialty Products-6

Specialty Products Appliance Control APPLIANCE CONTROLLER | FOR InternationaL & US MARKETS applications • Unit is designed to work with applications drawing water from a reservoir or a bottled water system such as coffee machines and carbonator pumps at soft drink kiosks. It will sense water empty signal coming from the water level sensor and turn off coffee machine or carbonator pumps plugged into the appliance controller. • Unit is designed to detect any 0-5 VDC signal and this incoming signal can be used in many industrial applications to turn connected devices ON or OFF. • Appliance controller...

 Open the catalog to page 6
Specialty Products-7

Specialty Products Oil Changers Porta-quick | FOR International & US MARKETS The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes. Specifications Body Bronze Impeller Nitrile Shaft Seal Lip Type Voltage 12 or 24 Vdc Motor Reversible with integral reversing switch Container Plastic with 14 quart (13.25 liter) capacity Power Cord 8 feet with alligator clips Suction Hose 4 feet (1.21 meter) of neoprene hose with 40 inch (1.16 meter) Teflon* dipstick probe Dimensions 13.5 in (800.10 mm) diameter; 13.625 in (346.08 mm) high Weight 9 lb (4.1 kg) Models Model #s CE Voltage Amp...

 Open the catalog to page 7
Specialty Products-8

Specialty Products Oil Changers Economy Engine Oil Changer | FOR Internatonal & US MARKETS The Economy Engine Oil Changer will extract up to 50 weight of oil at a temperature of 70°F (21°C) through the engine’s dip stick tube, usually in less than 5 minutes. Specifications Body Polypropylene Diaphragm Geolast Valves VitonTM Receiver Plastic with 10 quart (9.46 liters) capacity bucket Battery Leads 7 feet (2.13 meters) with alligator clips Suction Tube 8 feet (2.43 meters), oil & heat resistant Voltage 12 Vdc Amp Draw 4 amp Fuse Size 5 amp Motor Includes integral power switch Dimensions 12.375...

 Open the catalog to page 8
Specialty Products-9

Specialty Products Winches Electric Winches | FOR Internatonal & US MARKETS ITT Rule's Electric Winch product line comprises a broad range of high quality and reliable winches. Unique features include 3-stage planetary gears for greater pulling speed, power-in, power-out for consistent load control; corrosion resistant die cast drums and lifetime lubrication. Each winch is shipped with the cable assembly including hook, controls, and all electrical hardware necessary for battery hook-up and mounting hardware. Each series denotes the rated stall in pounds for the series. Model Key T = Trailer...

 Open the catalog to page 9
Specialty Products-12

Conversion Data To Convert To Multiply By To Convert To Multiply By To Convert To Multiply By BAR PSI 4.5 GALLONS, U.S. Cubic centimeters 3785 KILOGRAMS Pounds 2.205 CENTIMETERS Inches 0.3937 Gallons, U.S. Cubic feet 0.1337 Kilograms Tons (short) 1.102x10-3 Centimeters Feet 0.03280 Gallons, U.S. Cubic inches 231 Kilograms Grams 103 Centimeters Meters 0.01 Gallons, U.S. Cubic meters 3.785x10-3 LITERS Cubic centimeters 103 Cubic yards 4.951x10-3 Liters Cubic feet 0.03531 Centimeters Millimeters 10 Gallons, U.S. CUBIC CENTIMETERS Cubic feet 3.53x10-5 Gallons, U.S. Fluid ounces 128 Liters Cubic inches...

 Open the catalog to page 12
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.