High Voltage Power Supply
24Pages

In the H igh V oltage (HV) division of J. Schneider Elektrotechnik GmbH high voltage and DC power supplies for the high voltage and vacuum process equipment are designed and manufactured. Schneider DC power supplies range in the output rating from 1kW - 30kW with output voltages from 150V up to 150kV. J. Schneider built up its reputation as a competent supplier of high voltage power supplies for ion and electron beamapplications, x-ray, laser and high voltage plasma processes. The high reliability and robustness of the products in a variety of customer application environments led to this...

Distribution and Service Since development, production, distribution and service lay at the company of J. Schneider Elektrotechnik GmbH in one hand, a close teamwork in each stage of the lifecy- cle is granted. Further developments are made close to the market requirements, customer specified modifica- tions are realized in tight cooperation between sales de- partment and development department. Very good prod- uct acknowledgement guarantees an optimised service and maintenance. Customized Solutions We have made our web site easy to use in order to assist you in finding the DC power supply...

The primary switched high voltage power supplies of the series CAP TEC work according the resonance converter principle with a frequency of 100kHz. Adverse to the normally used pulse width modulation in which the regulation is realized by the variation of the power-on time, in this technique the regulation is re- alized by the variation of the pause time during fixed power-on time. The generation of the high voltage is effected in the CAP TEC series via converter cascades. The CAP TEC series is specially designed for the requirements to charge condensers. Four different charge powers with...

device series power voltage 6 150 180 300 600 800 1 2 3 5 6 8 10 15 40 80 page - V V V V V kV kV kV kV kV kV kV - - - 1 30 60 150 type 3 kV kV kV NRSG 0,3 W > 30kW NDRG > Type: NDRG-L031M01 Ue: 2 x400V AC +/-10% 50/60Hz Ua: 6V DC Pa: 360W Ia: 60 Kom. Nr. 607994 externe Absicherung: 5A Seriennr.: 00751329 VAP TEC 400W > NDCC pulse PLASMA TEC 8kW > SXEG > Type: NDRG-L031M01 Ue: 2 x400V AC +/-10% 50/60Hz Ua: 6V DC Pa: 360W Ia: 60а Kom. Nr. 607994 externe Absicherung: 5A Seriennr.: 00751329 PLASMA TEC 8kW >

COMPACT DESIGN Օ CURRENT REGULATION Analogue I/O-interface: OEM CUSTOMIZATION AVAILABLE Voltage Regulation: Output voltage and current are continuously ad-justable over 0 - 10 V analogue inputs. The out- put voltage and output current is given out by a 0 - 10V analogue output. Load dependent: 0,05% at 100 % load step input voltage dependent: ձ 0,05% within defined input voltage range Current Regulation: Residual ripple: Load dependent: 0,05% at nominal current at each voltage jump input voltage dependent: 0,05% within defined input voltage range Ѣɤ 0,1% pp. related to nominal voltage ≤ 0,5%...

COMPACT DESIGN Օ Current Regulation: CURRENT REGULATION OEM CUSTOMIZATION AVAILABLE Load: 0,3% of full current for any voltage change. Line: : ձ 0,1% of full current over specified input range. Residual ripple: ≤ 1% rms. related to nominal voltage Power connections: SELECTION TABLE AC Input connector power combicon connector DC output connector power combicon connector Dimension (H x W x D): 3U x 19 x 310mm CE Mark: EN50178 EN50081-2 EN50082-2 > NDRR switch mode power supplies are available in 3 models with voltage outputs ranging from 150V to 600V. The NDRR series is specially designed for...

MAXIMUM RATING MODUL NUMBER >

MAXIMUM RATING MODUL NUMBER >

COMPACT DESIGN Օ CONSTANT VOLTAGE / POWER OPERATION WITH AUTOMATIC CROSSOVER WIDE OUTPUT POWER OPERATING RANGE Օ EXTREM LOW ARC ENERGY OEM CUSTOMIZATION AVAILABLE Voltage Regulation: Load: 0,01% of full voltage for full load change. Line: ձ 0,01% of full voltage over specified input range Current Regulation: Load: 0,1% of full current for any voltage change. Line: : 0,1% of full current over specified input range. Residual ripple: Ѣɤ 50% rms. related to nominal voltage smaller rip-ples are possible depending on arc-energy. Power connections: AC Input connector 3-pin Han modular CE Mark: HV...

The switch mode power supplies of the VAP TEC series are specially designed for electron-beam evapora-tion processes. This series contains the actual high voltage power supply NHRR which provides an output voltage of 8 10kV at an output power of 3, 5, 10kW as well as the necessary cathode-heat transformer NDRG and the XY-sweep amplifier RNTR. Furthermore we recently developed a new device technology which includes the high voltage power supply as well as the cathode heat transformer in one cabinet called NHCR. The NHCR provides an output volt-age of 8kV with an output power of 2kW. The...

COMPACT DESIGN Օ CONSTANT VOLTAGE / CONSTANT CURRENT OPERATION WITH AUTOMATIC CROSSOVER ARC DETECTION, PATENTED ARC-CURRENT LIMITATION AND ARC COUNTER Օ UP TO THREE HV-OUTPUTS POSSIBLE Voltage Regulation: Load: 0,01% of full voltage for full load change. Line: 0,01% of full voltage over specified input range Current Regulation: Load: 0,1% of full current for any voltage change. Line: : ѱ 0,1% of full current over specified input range Residual ripple: ≤ 1% rms. related to nominal voltage Patented Arc-Current limitation: Limits the output current peaks to five times of rated current....

COMPACT DESIGN Օ SELECTION BETWEEN HEAT-CURRENT OR EMISSION CURRENT REGULATION ADJUSTABLE HEAT-CURRENT LIMITATION Օ CONTROL PATH LINEARISATION FOR YOUR E-BEAM SOURCE OEM CUSTOMIZATION AVAILABLE Heat Current Regulation: Load: 1% of full current for any voltage change. Line: ձ 0,1% of full current over specified input range. Residual ripple: ≤ 5% rms. related to nominal voltage Power connections: AC Input connector circular plug-in connector Dimension (H x W x D): HV input connector HV power connector HV output connector HV power connectors SELECTION TABLE 190mm x 238mm x 370mm Protection...

COMPACT DESIGN Օ LOW COST OVER CURRENT PROTECTION Օ OEM CUSTOMIZATION AVAILABLE SELECTION TABLE >