Catalogs >
J. Schneider Elektrotechnik >
AC-C-TEC 2403-05

AC-C-TEC 2403-05
1Pages

Catalog excerpts

Ultracapacitor buffered power supply manufacturer: Type : Art.-No.: J. Schneider Elektrotechnik GmbH AC C-TEC 2403-05 NCPA0724G01001 Short description The buffer module of the series AC-C-TEC works with ultra-capacitors as energy storage inside the housing. In case of an interruption of the DC-power supply the energy of the capacitors is released. The load is supplied by the buffer module till it is discharged. The back-up time depends on the state of charge of the capacitors and on the discharge current. Nominal input voltage Nominal input current Max. inrush current Output voltage in mains operation Output voltage in buffer operation Nominal output current Current limitation efficiency energy Back-up time Protective system Storage temperature Operational temperature Fusing input Fusing output LED- display Relais- outputs Norms and regulations connection, in-/ output connection, messages dimensions weight 115 – 230 V ± 15 % 0,84 A – 115 V AC 0,42 A – 230 V AC 30 A /2 ms 24,3 V DC ± 2 % 23,5 V DC ± 2 % 2 A DC (with nominal capacity) 3 A DC (with reduced capacity) 1,05 ... 1,5 x IA nom 88 % 0,5 kJ respectively 1000 Ws Depending on load IP20 - 20 … + 60 ° C - 20 ... + 60 ° C 2A T internal 3,15A T (external) operation LED green illuminates at mains present at mains present at terminal UE UE o.k. LED green illuminates at external supply present Uc > LED green illuminates at: Energy in capacitor > 80 % LED green, expires at: Energy in capacitor < 30 % LED is blinking slowly (0,8 Hz): During the charging until 80 % of the capacitor energy is reached LED is blinking fast (3,2 Hz) When the capacitor is discharged potentialfr. Relais-contact, closer 30 VDC/0,5A EN 50 178 / EN 60950 Spring type terminals max. 2,5 mm² Spring type terminals max. 1 mm² 152,5 x 72 x 130 mm (H x B x T) 0,83 kg

Open the catalog to page 1