Catalogs >
J&R Technology Ltd >
Roadside Emergency Telephone JR-TP-04

Roadside Emergency Telephone JR-TP-04
8Pages

Catalog excerpts

Roadside Emergency Telephone JR-TP-04 - 1

TABLE OF CONTENTS Introduction Welcome …………………………………………………………………………………2 Important Safety…………………………………………………………………...…….2 Information…………………………………………………………………………..……2 Unpacking ………………………………………………………………………………..2 Your System.……………………………………………………………………………..2 Optional Accessories ……………………………………………………………….…..3 Installation Power Connection and SIM Card ….……………….………………………….…..….3 System Setting SMS Programming (Change New Password) …...………………………..…………4 SMS Prog

Open the catalog to page 1

Roadside Emergency Telephone JR-TP-04 - 2

INTRODUCTION INTRODUCTION – Welcome INTRODUCTION –Unpacking Your System Thank you for purchasing J&R 3G Wireless Emergency Telephone. To ensure that you optimize the full capabilities of this product, please read this user’s manual before proceeding. Be sure to keep this manual for future reference in case any problems or questions should arise. We hope you enjoy your new J&R wireless phone. Waterproof cable INTRODUCTION - Important Safety Information Mounting screws Solar mounting When using your 3G phone equipment, basic safety precautions should always be followed to reduce the risk of...

Open the catalog to page 2

Roadside Emergency Telephone JR-TP-04 - 3

INTRODUCTION: Optional Accessories (Solar Power System) The following are optional accessories available from A. Solar Power Panel B. Power Converter C. L-ion Battery Pack D. Solar Power Panel Mounting Bracket Solar Power Panel COMPONENT NAMES AND FUNCTIONS J&R the Solar Power System: Power Converter COMPONENT NAMES & FUNCTIONS Li-ion Battery INTRODUCTION: Optional Accessories (Stainless Steel Phone Booth) The stainless Steel Phone Booth is specially design for GEP360 used at the outdoor environment for the extra weather-proof and vandal-proof protection. FRONT VIEW SIDE VIEW BOTTOM VIEW...

Open the catalog to page 3

Roadside Emergency Telephone JR-TP-04 - 4

TING – SMS Programming (Change New Password) SYSTEM SETTING – SMS Programming (Change Emergency Phone No.) The emergency phone allows you to program and to change setting by sending SMS message. Here is the SMS programming instruction for emergency phone: To set emergency phone number: The password is 1325. The command type is 11 for setting emergency phone number. The Note: Factory default password is 9999. Here is the SMS command format: data is 911 for the emergency phone number. Send SMS to emergency phone: Password#Command Type Date# To reset to the emergency phone to factory default...

Open the catalog to page 4

Roadside Emergency Telephone JR-TP-04 - 5

SYSTEM SETTING - SMS Programming (Change Auto Hang-up Time)

Open the catalog to page 5

Roadside Emergency Telephone JR-TP-04 - 6

SYSTEM SETTING – SMS Programming (Change Auto Hang-up Time) To check emergency phone number: The password is 1325. The command type is 35 for obtaining the emergency phone number. In case you can check the existing emergency phone number, you can use this function. Send SMS to emergency phone: SYSTEM SETTING – SMS Programming ( Manual Queries) To check emergency phone number: The password is 1325. The command type is 35 for obtaining the emergency phone number. In case you can check the existing emergency phone number, you can use this function. Send SMS to emergency phone: 1325#205# SMS...

Open the catalog to page 6

Roadside Emergency Telephone JR-TP-04 - 7

SYSTEM SETTING – SMS Programming ( Self-report setting) To set service phone number (To receive the self-report message): To set a reception level for low reception report: The password is 1325. The command type is 50 for setting service phone number. The data The password is 1325. The command type is 42 for setting a reception level. The data is 13 is 13537685 for the service phone number. In case you can receive the existing emergency phone alert report, you can use this function. In case you can receive the existing emergency phone alert report of low reception, you can use this...

Open the catalog to page 7

Roadside Emergency Telephone JR-TP-04 - 8

SYSTEM SETTING - SMS Programming (Restore Factory Settings) To reset to the emergency phone to factory default setting: The password is 1325. The command type is 99 for restore factory settings. Send SMS to emergency phone: SMS response message from emergency phone: You will receive messages with an Error behind your programming messages, when your commands are wrong. Wrong Password SMS response message from emergency phone: Wrong Command SMS response message from emergency phone:

Open the catalog to page 8

Roadside Emergency Telephone JR-TP-04 8Pages

Catalog excerpts

All J&R Technology Ltd catalogs and technical brochures

Roadside Emergency Telephone JR-TP-04
8Pages