P-Max Fans for use with Extractor Arms and Extractor Cranes 1300 • 2100 • 2100 TURBO The P-Max fans are designed for extracting smoke, gas and lighter dust. They fit directly to the extractor or together with a mounting bracket. Outlet is round with an inside diameter of 200 mm. For Extractor Cranes the 2100 TURBO is recommended. Mounting The P-Max fans fit the different extractors in the following ways; 1. The wall bracket directly: Flexi Extractor Arms, Pro-Flex PRSV and Super-Max SMSV. 2. Together with Fan Bracket and Inlet P-088 (d.125 mm), P-016 (d.160 mm) or P-089 (d.200 mm): Pro-Flex and Super-Max Extractor Arms. 3. Together with Fan Bracket with Turning Flange P-045 (d.160 mm) or P-151 (d.200 mm): Flexi, Pro-Flex and Super-Max Extractor Cranes. 30 Years Experience! 30 years experience of design and manufacturing at your service. The Plymoth products are a combination of well-proven technique and progressive new ideas. Plymoth is always a step ahead – but not expensive! Art.Nr. Fan P-Max 1300 / 0.37 kW / 3-Phase Fan P-Max 2100 / 0.75 kW / 3-Phase Fan P-Max 2100 TURBO / 0.75 kW / 3-Phase Fan P-Max 2100 TURBO / 0.75 kW / 1-Phase Fan Bracket and Inlet Fan Bracket with Turning Flange Art.Nr. Art.Nr. Art.Nr. d.125 mm d.160 mm d.200 mm