Plymoth Maxi-Mesa. 1m and 1.4m Plymoth Maxi-Mesa is a modern combined Backdraft and Downdraft Table with built in regulating Damper. 1m and 1.4m Models. Dust, Fume and Gases. Plymoth Maxi-Mesa is suitable for welding and heavier grinding. It extracts backwards and downwards. Can be used in many other applications. Unique regulating Damper. Plymoth MaxiMesa is as standard equipped with a regulating damper which makes it possible to adjust the width of the vertical openings of the backdraft panel. You can quickly adjust the total air volume between backdraft and downdraft with a handle on the front side. Extraction Arm. For heavy welding the MaxiMesa can be equipped with a Flexi FLB 1.5m extraction arm. Thanks to the unique regulating damper the total air volume can be divided between backdraft, downdraft and extraction arm. Heavy Grinding. For heavy grinding the Maxi-Mesa with a table top of vertical 40x5mm flat bar-irons should be used. Hot particles and sparks will fall down into the dust drawers. The main air volume should go through the backdraft panel and, if fitted, the extraction arm, to catch hot fume, dust and gases which are going upwards. Table Top 75mm. Maxi-Mesa can be delivered with a table top of 75mm wide iron bars with 15mm extraction slots in between. Strongly designed. Plymoth Maxi-Mesa is designed of 2 and 3mm steel-sheet. The table height can be adjusted from 800-950mm. The side panels can be opened for long objects. Suitable air volume for 1m table is 1500-2000m3/h and for 1.4m table 2000-3000m3/h. It shall be connected with an external fan and extraction system. Connection diameter is 199mm outside. Plymoth is always a step ahead - but not expensive! 40 Years Experience of Clean Air at Work. J. Plymoth AB - Ostra Varvsgatan 4, 211 75 Malmo, Sweden Tel. +46 40 70015 ■ Fax. +46 40 30 26 92 ■ E-mail: [email protected]