Chemikus D.75mm D.100mm. Bench Top mounting 1m 1.3m 1.6m Soldering, gluing and Laboratories Chemikus extraction arms are designed to extract smoke, gas and light dust from soldering, grinding, gluing and laboratory work. Free Airflow in the Hose Chemikus has the support arm outside. Nothing in the hose to disturb the airflow. The hose has a smooth inside. It is easy to dismantle the hose, to clean it, if necessary. Perfectly balanced. The external hydraulically suspended parallelogram arm is the secret. The hood is very easy to move and 100% stable in all positions. Bench Top mounting Chemikus can be mounted standing on top of a table with a hole through the table or at the edge of the table with the included table bracket. Turning flange 360. Outlet with d.80mm (inside) for Chemikus d.75mm and outlet d.100mm (inside) for Chemikus d.100mm, is included. 40 Years Experience. 40 years experience of design and manufacturing at your service. The Plymoth products are a combination of well proven technique and progressive new ideas. J. Plymoth AB - Carlsgatan 12A, 211 56 Malmo, Sweden Tel: +46 40 700 15 ■ Fax: +46 40 30 26 92 ■ E-Mail: [email protected] ■ www.plymoth.com