Electrically operated ball valve fitted with a J3 electric actuator. - 3 Pages

Add to MyDirectIndustry favorites
Electrically operated ball valve fitted with a J3 electric actuator.

Catalog excerpts

Electric Brass Ball Valve Type: J3-1100E/ 1110E/ 1120E Available with actuator function: POWER OPEN - POWER CLOSE FAILSAFE MODULATING Electric actuator direct mounted Electric actuator fitted via kit Actuator fitted via TSM stem extension Main J3 Smart electric actuator features: LED light for continual visual actuator status feedback. Actuator housing Fully weatherproof smart industrial actuator, CE marked. Multi-voltage capable actuator , EU manufactured by J+J. Actuator temp limits All external electrical connections, no need to remove cover . Assembly temp limits Selectable manual override facility. Thermostatic anti-condensation heater. End of travel switches for remote open/ closed indication. Valve body Nickel plated brass Valve ball Chrome plated brass Valve seats Valve Pressure rating Electronic torque limiter. Water, oil, air and most non-corrosive media, subject to compatibility with wetted parts in contact with media. Not for use on potable water & NOT recommended for use on steam. Valve actuators sized on a maximum differential pressure of 10 bar wet service, operated at least once per day. If the intended duty differs from these parameters, or is dry (air or gas), please call to check actuator sizing as a larger output valve actuator may be required. Maximum working temperature of a direct mounted assembly is +70C. For higher working temperatures , consider models that have a mounting kit or TSM stem extension between the valve and the smart electric valve actuator which uses air cooling to dissipate the rising heat from the ball valve away from the actuator. Should the J3 smart actuator see more than +70C it will malfunction. Valve temp limits Size range How this electric 1/4 turn valve works (on-off): Electrically operated valves are driven by a motor and gearbox. On receipt of a continuous voltage signal the motor runs and, via a gearbox in the J+J smart electric actuator, rotates the valve stem. The motor stops at the desired position (usually 0° or 90°) by internal cams striking micro-switches. The smart valve actuator remains in this position, with the voltage still applied continuously, until switched and a continuous voltage reversing signal is applied, which runs the motor in the oppo- Ball valve information: Full bore 2 piece construction, providing full unrestricted flow and a very low pressure drop across the valve. Designed for automation with integrally cast ISO5211 actuator mounting platform. Turning the ball through 90° fully opens the valve, turning back through 90° fully closes the valve and isolates the flow. End connections are threaded BSP female. Uncontrolled copy, not subject to automatic updates. Kv = m per hour with a 1 bar pressure drop across the valve CV = US gallons per hour with a 1psi pressure drop across the valve Cv = Kv / 0.86

 Open the catalog to page 1

Electric Brass Ball Valve TYPE: 1100E/ 1110E/ 1120E Electrical Connection - wiring J3 Series Smart Electric Actuator Function options: J3 ON-OFF ELECTRIC ACTUATOR Standard function In J+J electric actuators all electrical connections are made externally using the external DIN plugs supplied with the actuator. There is no need to remove the valve actuator’s cover to connect electrically. There are no terminals internally to connect to. Power open, power close. Stays put on loss of external power. Power remains on at all times. J3 ON-OFF & FAILSAFE WIRING (Same connection for either) External...

 Open the catalog to page 2

Electric Brass Ball Valve TYPE: 1100E/ 1110E/ 1120E Type: 1100E Actuator direct mounted to valve Dimensions: 1100E Dimensions remain unchanged for all versions - On-off, failsafe, modulating and failsafe modulating Model Type: 1110E Actuator fitted to valve via a bracket and drive adapter 1110E Dimensions remain unchanged for all versions - on-off, failsafe, modulating & failsafe modulating Model Type: 1120E Actuator fitted to valve via a TSM stem extension 1120E Dimensions remain unchanged for all versions - on-off, failsafe, modulating & failsafe modulating Model ≤1/2” Uncontrolled copy,...

 Open the catalog to page 3

All J+J AUTOMATION UK catalogs and technical brochures

  1. Model R20

    1 Pages

Archived catalogs

  1. J3 Series

    8 Pages

  2. Model J3 -6610

    3 Pages

  3. Model J3 -6510

    3 Pages

  4. Model J3 -1100E

    2 Pages

  5. Model J3 -1300

    2 Pages