Current transducers_IACT-C series


Catalog excerpts

Current transducers_IACT-C series - 1

cTCus C f >iRoHSD E344623 ^ ^ COMPLIANT J For the electronic measurement of currents : AC current sensor, IACTXXC series has a good stability in high currents and has a highly insulated between primary and secondary circuit. Applications • AC variable speed drives and servo motor drives • Static converters for DC motor drives • Battery supplied applications • Uninterruptible Power Supplies (UPS) • Switched Mode Power Supplies (SMPS) • Power supplies for welding applications. Features • Closed loop (compensated) current transducer using the Hall effect • Insulated plastic case recognized according to UL 94-V0 • Panel mounting Advantages • Low temperature drift • Optimized response time • Wide frequency bandwidth • No insertion losses • High immunity to external interference • Current overload capability. • Excellent accuracy • Very good linearity Specifications are subject to change w

Open the catalog to page 1
Current transducers_IACT-C series - 2

Current Transducer IACT36C Dimensions IACT36C (in mm) IACT36C-XXX series Connection Diagram This product needs ±15V (+15V and -15V DC bi-polar power supply) as operating power supply. Even if the case of current detection of only plus direction, it still ±15V needs. In any case, it is not possible to operate with only +15V. Unless otherwise specified, tolerances shall be ±0.5mm Connector Manufacturer Part Number Specifications are subject to change

Open the catalog to page 2
Current transducers_IACT-C series - 3

Current Transducer IACT36C Mounting option DIN rail mounting Panel mounting Place the cradle on the Panel and fix it via M5 screw. Install the product on the cradle, while matching the arrow direction of cradle and indication in the bottom of the product. ※ Sealing for metering standards (All types are available) Specifications are subject to change without not

Open the catalog to page 3
Current transducers_IACT-C series - 4

Current Transducer IACT36C Safety The J&D CTs are UL/EN 61010-1, CE, RoHS compliant and certified, are also conformed up to Pollution degree 2, 600Vac CAT III rated devices. Please be sure that Failure to follow these instructions can result in serious injury and/or cause damage. The transducer shall be used in electric/electronic equipment in accordance with the operating instructions of all related systems and component manufacturers with respect to applicable standards and safety requirements. Follow corresponding national regulations and safe electrical work practices. This equipment...

Open the catalog to page 4

All J&D Smart Sensing catalogs and technical brochures

  1. Meter Catalog

    76 Pages