MRP-46, MRP-42K
2Pages

Pneumatic magnets Ixtur MRP-46 and MRP-42K are pneumatically controlled neodymium permanent magnets that are suitable for gripping parts with different shapes. TECHNICAL SPECIFICATIONS * plate thickness > 12 mm ** cylinder diameter > 100 mm *** see 'Residual gripping capacity' on the next page The lifting capacities (WLL) are determined with a safety factor of 3. Requirements for compressed air: Water separation, particle filter < 5 |jm The minimum load diameter for the magnets is 20 mm. MRP-42K has considerably lower residual gripping capacity than MRP-46. MRP magnets are suitable for flat and round parts, and for steel and cast iron. Ixtur magnets can handle solid The magnets do not change their magnetic state in case of loss of compressed air. and perforated material and they can be used in any orientation needed, so it's possible to handle objects with various shapes and angles. The compact size combined with the strong gripping force provides high versatility. Ixtur MRP magnets are Magnets can be used in various applications: lifters, maintenance-free and have a short cycle time, allowing robot grippers, fixtures, production automation, etc. More information: www.ixtur.com high production speed and efficient automation. Company • Ixtur Ltd. is a Finnish magnet technology company established in 2010. Ixtur develops and manufactures permanent magnet based lifters, grippers and customer applications for machinery, welding, automation, robotics and material handling. Ixtur is focused on energy-efficient magnet components and applications. Ixtur Ltd. Varespellontie 6, FI-21500 Kaarina, Finland www.ixtur.com

Pneumatic magnets Gripping capacity vs. material thickness and airgap The nominal gripping capacities can be obtained with the material thicknesses stated in the technical specifications table. The magnets can be used also with thinner materials, but the gripping capacity will be lower, as shown in the graphs on this page. The given gripping capacities are valid for mild steel (S355). Residual gripping capacity The residual gripping capacity with MRP magnets, i.e. the gripping capacity when the magnet is OFF, varies based on the material and structure of the gripped part. In extreme cases,...