Pneumatic Magnets MRP-170 & MRP-170K Ixtur MRP-170 and MRP-170K are pneumatically controlled neodymium permanent magnets that are suitable for gripping parts with different shapes. The magnets do not change their magnetic state in case of loss of compressed air. The compact size combined with the strong gripping force provides high versatility. Ixtur MRP magnets are maintenance-free and have a short cycle time, allowing high production speed and efficient automation. MRP magnets are suitable for flat and round parts, and for both steel and cast iron. Ixtur magnets can handle solid and perforated material and they can be used in any orientation needed, so it's possible to handle objects with various shapes and angles. * plate thickness > 25 mm ** cylinder diameter > 120 mm *** see the paragraph 'Residual gripping capacity' below The lifting capacities (WLL) are determined with a safety factor of 3. Residual gripping capacity The residual gripping capacity, i.e. the gripping capacity when the magnet is OFF, varies based on the material and structure of the gripped part. With MRP-170, in extreme cases, parts up to 30 kg may stay attached. The residual capacity is greatest as long as the part continously stays in contact with the magnet after the magnet has been turned from ON to OFF. MRP-170K is a model of the magnet, which has reduced residual gripping capacity: 3 kg with flat surfaces and 8 kg in extreme cases. If the amount of residual capacity is critical to the application, pretesting with the actual part is recommended. An MRP-170 magnet with a lifting adapter. For cylindrical loads, the minimum diameter is 25 mm. The magnet can be used in various applications: lifters, robot grippers, fixtures, industrial automation, etc. More information: www.ixtur.com TECHNICAL SPECIFICATIONS Company • Ixtur Ltd. is a Finnish magnet technology company established in 2010. Ixtur develops and manufactures permanent magnet based lifters, grippers and customer applications for machinery, welding, automation, robotics and material handling. Ixtur is focused on energy-efficient magnet components and applications. Ixtur Ltd. Varespellontie 6, FI-21500 Kaarina, Finland www.ixtur.com

MRP-170 & MRP-170K Gripping capacity vs. material thickness, diameter and airgap The nominal gripping capacity can be obtained with plate thickness of ≥25 mm and with no airgap. The magnets can be used also with thinner materials, but the gripping capacity will be lower. The given gripping capacities are valid for mild steel (S355). Company • Ixtur Ltd. is a Finnish magnet technology company established in 2010. Ixtur develops and manufactures permanent magnet based lifters, grippers and customer applications for machinery, welding, automation, robotics and material handling. Ixtur is focused...