MRP-130F
2Pages

Pneumatic Magnet Ixtur MRP-130F is a pneumatically controlled neodymium permanent magnet that is suitable for gripping parts with different shapes. The magnet does not change its magnetic state in case of loss of compressed air. Ixtur MRP magnets are maintenance-free and have a short cycle time, allowing high production speed and efficient automation. MRP-130F is optimized for loads which are not in contact with the entire gripping area of the magnet. However, for proper gripping, it is necessary to at least partly touch both of the magnet's magnetic poles. Characteristics of MRP-130F make it versatile gripper for parts having irregular shape or rough surface like cast iron. The magnet can be used in various applications: lifters, robot grippers, fixtures, production automation, etc. More information: www.ixtur.com Company • Ixtur Ltd. is a Finnish magnet technology company established in 2010. Ixtur develops and manufactures permanent magnet based lifters, grippers and customer applications for machinery, welding, automation, robotics and material handling. Ixtur is focused on energy-efficient magnet components and applications. Ixtur Ltd. Varespellontie 6, FI-21500 Kaarina, Finland www.ixtur.com see the paragraph 'Residual gripping capacity' below may require 6 bars to release the load when the load is thick and covers most of the gripping area of the magnet Lifting capacity (WLL) is determined with a safety factor of 3. Residual gripping capacity The residual gripping capacity, i.e. the gripping capacity when the magnet is OFF, varies based on the material and structure of the gripped part. In extreme cases, parts up to 40 kg may stay attached. The residual capacity is greatest as long as the part continously stays in contact with the magnet after the magnet has been turned from ON to OFF. If the amount of residual capacity is critical to the application, pretesting with the actual part is recommended.

Threaded holes in the sides and bottom of the magnet enables use of pole extensions. The pole extensions can be used to lengthen or widen the magnet's gripping area to better fit onto the gripped load. Pneumatic Magnet Gripping surface - Magnetic poles Gripping flat material Pneumatic connections, 2 pcs. • Rapid fittings for plastic tubing • Tube external dia 6 mm • Threads 1/8, depth 10 mm Company • Ixtur Ltd. is a Finnish magnet technology company established in 2010. Ixtur develops and manufactures permanent magnet based lifters, grippers and customer applications for machinery, welding,...