Transfer chains High wear resistance and durability

• ll-round protection of functional components of the chain: A attachments enclose the chain on three sides, even in the vicinity of the chain wheels • entle handling of delicate goods G • lose-fitting covers prevent the risk of injuries and C malfunctions • utside of the chain is absolutely clean, O so no accumulation of dust • ow level of friction in the event of intentional or accidental L stoppage of goods conveyed • rive chain remains clean, even under adverse D operating conditions • uitable for horizontal and vertical running S • o lifting of the load in the vicinity of the chain wheels...

Technical characteristics Chain design Attachment characteristics Friction coefficients of 0.1 to 0.3 are assumed for determination of chain tensile force, depending on conveyor situation. iwis supplies attachments for the following applications: Drive chain calculation is performed in accordance with the examples set out in the iwis Chain Engineering Handbook or via the iwis chain calculation programme available on our website. It goes without saying that you can count on iwis’ help and support if you have enquiries about details of chain design. Please let us know in case you need help. 1....

Technical characteristics Connecting link No lifting of loads in the vicinity of the chain wheels The chain ends are connected by an outer link , and a slide fit plate pushed onto the pins. Finally, bend the chain so that the two attachments can be clipped over the rivet to complete the connection. A locking spring is not required. The two relevant attachments are coloured black for easy location of the connecting link. No adverse effect on conveyed material near the chain wheel (vibrations, shocks, jolts etc.) Chain track and support When the iwis parts conveyor chain is installed horizontally,...