Wi-Fi enabled PLC system
2Pages

eYe - enhance Your efficiency Wi-Fi Enabled PLC System eYe (enhance Your efficiency) is a Wi-Fi enabled PLC system with internal memory. eYe runs on RTOS (Real Time Operating System) with a built in TCP-IP server. It has 8 digital inputs, 2 digital outputs, real time clock and a full functional serial port. eYe can be used for any kind of IoT applications in verticals like remote monitoring, Industrial automation and control applications. One such application this product is being used is for monitoring of discrete machines such as CNC machines, SPMs etc. in manufacturing shop floor. Suitable signals are tapped from the machines and connected to digital input lines on the eYe. eYe monitors the changes in the signal status and records the status change in its memory with a time stamp. This data can be retrieved from eYe through WiFi connection and analysed to determine the machine status. Full functional serial port can be used to upload / download data to the machines remotely. PC or mobile devices can communicate with eYe using WiFi network. Application can connect to eYe as TCP-IP client to collect data or to control the device. eYe provides both Client mode as well as Software Access Point mode of operation, so that it can be connected to other Access point when configured as client or can be made work as Software Access Point to which other devices can be connect. The external client can be physically away as it connects through WiFi and this enables remote monitoring and control. APPLICATIONS: Industrial automation, home automation/ home appliance control, medical applications & other IoT based applications Wi-Fi Module: Marvell’s 88MC200 Microcontroller, 32-bit ARM Cortex-M3 core @200MHz Compact form factor Avoids loss of data even when Wi-Fi network is down Quick customization services in a very shorter period Suitable for wide range of Applications Microcontroller based solution enables low cost design Interfaces Controllers: RTC USB to Serial USB to Ethernet bridge (Hardware support available. Software development on request) 8801 Wi-Fi Chipset supporting 802.11 b/g/n standards 1MB Internal Flash Connector for external antenna interface External Memory: 512 KB EEPROM Communication Interfaces: SPI I2C UART USB_OTG* Ethernet* Onboard Connectors: Debug USB UART Board to Board Connector Power Supply: 5V , 2.5A *Optional features are not supported by default Carrier Board: 8 Optically isolated inputs and 2 outputs Optically isolated UART interface Communication Interfaces (carrier board): Debug UART Full functional UART Digital IOs Software Features: FreeRTOS Driver of following interfaces: - Internal Flash - RTC - UART - I2C - EEPROM - GPIO IN/OUT TCP-IP Server on board to configure and monitor Built in HTTP web server

eYe - Wi-Fi ENABLED PLC SYSTEM BLOCK DIAGRAM External Input Line eYe - Wi-Fi enabled PLC System Full functional UART Interface Board Optical Isolation Digital IOs Main Board Smart Phone Board to Board Connector Terminal Block (input) Debug UART Debug USB Buzzer & LEDs External Antenna Custom Development Wi-Fi Controller Board FreeRTOS Binary Power Adapter User Manual Custom Carrier Card Development USB to Ethernet FreeRTOS Driver iWave Systems Technologies, established in 1999, focuses on Product Engineering Services involving Embedded Hardware, Software & FPGA. The company designs and...