Vybrid Pico ITX SBC
1 /2Pages

Vybrid Pico ITX SBC

Vybrid Pico ITX SBC
1 /2Pages

Catalog excerpts

Vybrid Pico ITX SBC-1

Vybrid µMXM Development Board iW-RainboW-G16D, Vybrid µMXM Development Kit incorporates Vybrid VF6xx SOM and Pico-ITX form factor carrier card. As it is based on Freescale's Vybrid VF6xx/VF5xx family solution combining ARM Cortex-A5 and Cortex-M4 cores, it eliminates the need for an external MCU for real time control applications. Vybrid devices also provide a powerful combination of on-chip encryption; secure boot, anti-tamper and anti-clone capabilities to secure sensitive or critical infrastructure applications such as smart grid or industrial control. The Vybrid µMXM Development Kit is packed with 256MB on board RAM & 256MB NAND Flash and powered with Linux 3.0.15 OS. The module brings all the Vybrid peripheral interfaces to a 314-pin MXM edge connector which can be validated on the carrier board. APPLICATIONS : Industrial Process Control & Kiosks, Smart Grid, Medical/Healthcare Devices, Smart Connected Devices, Battery operated handheld devices iW-RainboW-G16D-µMXM HIGHLIGHTS Dual Heterogeneous cores: ARM Cortex A5 @500 MHz & ARM Cortex M4 @ 167 MHz Asymmetric Multi Processing Commercial grade powering temperature Ultra low power consumption Security support & Mixed signal capability SPECIFICATIONS Vybrid µMXM SOM Vybrid VF6xx CPU 256MB DDR3 RAM 256MB NAND Flash (default boot device) OS: Linux 3.0.15 µMXM Carrier Board RS232 Debug Console - 1 Port Standard SD - 1 Port USB 2.0 Host x 1 Port USB 2.0 OTG as a device - 1 Port 10/100 Ethernet - 2 Port I2S Audio Codec-Audio Jack I2C Resistive touch controller RGB Display interface (Display not included)

 Open the catalog to page 1
Vybrid Pico ITX SBC-2

Vybrid µMXM DEVELOPMENT BOARD BLOCK DIAGRAM 7" RGB LCD Connector Reset Button SD/MMC SD Conn (4 bit) 3.5mm Audio IN/OUT Jacks 2 PowerConn* LVDS Jack 2 LVDS Conn* RTC Battery* 2 LVDS Conn* RTC Controller* 2Push Button LVDS Conn* SJC RJ45 with USB Type A Conector Vybrid SOM µMXM Connector (314 Pin Connector) RJ45 with USB Type A Connector 2 LVDS Conn* JTAG Header CAN Transceiver CAN Header* CAN Transceiver Debug UART UART Header* UART Header* Carrier Expansion Connector 2 LVDSJack* RCA Conn* *Optional OPTIONAL KITS CUSTOM DEVELOPMENT iW-RainboW-G16D Platform Board Support Packages Power Adapter...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.