Embedding Intelligence System On Module iW-RainboW-G24M iWave’s Arria 10 SoC System on Module is based on the Arria 10 SX family device with F34 package. The module is equipped with 32-bit DDR4 memory support for HPS with ECC and 64-bit DDR4 support for FPGA. All the 10s and high speed transceiver blocks will be available on the SOM board to board connectors. APPLICATIONS: Test and measurement equipment, Control and intelligence equipment, Diagnostic medical imaging equipment, Wireless infrastructure equipment, Compute and storage equipment, Broadcast and distribution equipment. iW-RainboW-G24M HIGHLIGHTS ArrialO SOC & FPGA device compatibility • SX270,SX320,SX480,SX570, Sx660 • GX270,GX320,GX480,GX570,Gx660 4GB DDR4 for FPGA 24 high speed transceivers @ 17.4Gbps 48/96 LVDS from BANK 3B & 3C 93 SE from BANK 2A & 3A Industrial grade availability 10+ Years availability Dual 240 Pin Board to Board Connector:

Arria 10 SoC SOM - BLOCK DIAGRAM Power to Peripherals Hard Processor System TM (Dual ARM Cortex - A9) MicroSD Connector SDRAM Controller (Bank 2J & 2k) Debug UART HPS-D-UART SDMMC Power Regulators AS Interface (Optional) High Speed Transceiver (2 Channels from Bank 1E) Arria 10 SX/GX FPGA High Speed Transceiver (6 Channels) High Speed Transceiver (4 Channels) Active Serial High Speed Transceiver (6 Channels) High Speed Transceiver (6 Channels) DDR4 - 4GB FPGA/HPS JTAG Header Note: HPS (Hard Processing System) is supported only in Arria10 SX devices. All IOs in SOM Expansion connectors are 1.8V...