IWave Embedding Intelligence iW-RainboW-G21M-Q7 HIGHLIGHTS Quad Core ARM Cortex - A15 @ 1.4GHz Quad Core ARM Cortex - A7 @ 780MHz Simultaneous Full HD encode & decode PowerVR G6400 hardware graphic accelerator Up to four channel video input USB3.0 support Industrial temperature support available iWave’s RZ/G1H based Qseven CPU module integrates Renesas RZ/G1H Quad core ARM Cortex A15 @1.4GHz & Quad core ARM Cortex A7 @ 780MHz CPU with rich set of features and IO peripherals. It integrates full HD hardware codecs, graphic acceleration, DDR3 RAM, eMMC Flash, Micro SD slot, USB HUB, HDMI transmitter and Gigabit Ethernet PHY. The SOM is ideally suitable for high performance video intensive and graphic rich applications. APPLICATIONS: Video Surveillance, Digital Signage, Amusement, Vehicle infotainment & Nagivation, Real time image recognition, Network & high vision Camera, Gaming console, Industrial control, Point of sale & ATM. Notel: By default 2GB DDR3 and 4GB eMMC only supported. Contact iWave systems for memory expansion support. Note2: Through DIP switch, either EtherAVB (or) 4 Camera(VI0-8/16bit can be selected at a time. if VI0 is used in 16bit, then VI3 cannot be used. Note3: PCIe & SATA is multiplexed on the CPU. At a time anyone can be used. By default PCIe is supported. Note4: Either LVDS 2"nport or HDMI can be supported by software configuration. By default HDMI is supported.

RZ/G1H Qseven SOM - BLOCK DIAGRAM SPI Programming Header HDMI Transmitter, (Optional) 8 GPIOs, Status & Control Signals 1 PCIe & SATA1 is multiplexed. PCIe is supported by default. SATA0 & USB3.0 is multiplexed. USB3.0 is supported by default 2 If VI1 is used in 16bit, VI2 cannot be used 3 Through DIP switch, either EtherAVB (or) 4lhCamera (VI0-8/16bit) can be selected at a time. If VI0 is used in 16bit, then VI3 cannot be used 4 HDMI is optional feature & not supported by default. LVDS1 is supported by default Dual SPDT switch IC (Optional) t On-Board Regulators JTAG(Optional) (20Pin Header) 2Pin...