iWave Systems offers high performance Qseven SOM module based on Freescale's i.MX6 ARM Cortex-A9 processor for faster and multimedia focused applications. With extreme peripheral integration, the CPU supports industry latest high-performance interfaces, such as PCIe Gen2, Gigabit Ethernet, SATA 3.0, HDMI 1.4, SDXC, MIPI CSI/DSI and 64Bit DDR3 interfaces. The module is compatible to Qseven R2.0 ARM specification and features 1GHz ARM Cortex A9 Quad/Dual/Dual Lite/Solo core CPU, on-board 1GB DDR3 RAM, eMMC Flash, Micro SD slot and JTAG headers. APPLICATIONS : Industrial HMI, Automotive IVI, Video & Navigation, Graphical Instrument Clusters, Portable Medical Devices, Intelligent Industrial Control Systems and Home Energy Management Systems SPECIFICATIONS iW-RainboW-G15M-Q7 HIGHLIGHTS ARM Cortex A9 @1GHz/800MHz Quad/Dual/ Dual Lite/Solo core 64-bit DDR3-1066 support PMIC Freescale PMIC Expansion Connector** Camera CSIx2 (8-bit) MIPI CSI, DSI 24-Bit RGB LCD IF Dual UART 3x3 Key, Memory Bus ESAI, SPDIF MLB I2C3, PWM, GPIO 1GB DDR3 for Q/D/DL (Expandable up to 4GB*) 512MB DDR3 for Solo (Expandable up to 2GB*) OpenGL® ES 2.0 3D, OpenVG™ 1.1 graphics accelerators 4GB eMMC Flash (Expandable*) 2MB SPI Flash (Expandable*) On-board Micro SD Slot Multi format HD1080p HW decode and encode Qseven Edge Connector Four simultaneous display support Technical and quick customization support 5+ years, long term support Data UART x 1 PWM GPIOs PCIe v2.0 x 1 lane HDMI 1.4 # SATA 3.0 x 1 Gigabit Ethernet Dual LVDS USB2.0 Host x4 USB2.0 OTG AC97 Audio 8-bit SD/MMC CAN1 SPI, I2C Debug UART x 1 Board Form Factor Qseven R2.0 Compatible Power Input 5V, 1A Typical Operating Systems Linux 3.10.17 Android 4.3 Jelly Bean Windows Embedded Compact7 Debug Support Onboard JTAG Header* *Optional features are not supported by default ** Not populated in mass production SOM # Support available only for i.MX6 Quad and Dual SOMs Note: device drivers provided are for specific interface chipsets which are used in iWave's carrier board

i.MX6 Qseven MODULE BLOCK DIAGRAM DDR3 RAM PMIC (512MB/1GB SPI Flash ‐ 2MB eMMC ‐PMIC 4GB Micro SD Connector Expansion Connector (80Pin header) Camera1 (8bit) x 1 UART (with CTS & RTS) x 2 ESAI x 1, SPDIF x 1 Memory Bus (Address/Data Muxed) Camera2 (8bit) x 1 MIPI‐CSI x 1 Expansion Expansion Connector Connectors (80Pin header) (4 Port) LVDS x 2, PWM x 1 HDMI x 1 Nand Flash* ESAI, SPDIF Single Bit WDOG Inverter 8 GPIOs, Status & Control Singles Dual SPDT Switch IC* QSEVEN PCB Edge Connector (230 Pin) Note: MLB is supported only in automotive part OPTIONAL KITS CUSTOM DEVELOPMENT i.MX6 Qseven SOM...