Bluetooth Interface Module
9Pages

Bluetooth Interface Module Datasheet Bluetooth Interface Module Product Overview Bluetooth Interface Module provides the Bluetooth Communication between CPU Board and any Bluetooth enabled device. This Module can be used to transfer different types of files as well as commands to the CPU Board. The board is based on SPBT2632C2A Bluetooth module. DB9 Connector / 6 Pin Header is provided (as shown in Figure) for interfacing with the CPU Board. As the board is meant for developing the projects at academic level, the board comes with 7 GPIO Pins which can be used for driving external devices (LED, Relay) etc. The board has inbuilt standard DB9 connector for PC Interface. iWave Systems Technologies Pvt Ltd

Bluetooth Interface Module Datasheet Technical Specification Summary Bluetooth Module Operating Voltage Input Voltage Current Consumption Flash Memory iWave Systems Technologies Pvt Ltd

Bluetooth Interface Module Datasheet iWave Embedding Intelligence C \ External Reset 5V Power Jack Table 1: Pin Description- 6 Pin Header Note: 6 Pin Header is used for CPU Interface. Note: Cable with Tx and Rx connected in straight should be used for PC interface iWave Systems Technologies Pvt Ltd Page 3

Bluetooth Interface Module Datasheet Power Bluetooth Interface board can be powered by below 2 options. 1) External 5V from AC to DC Adapter 2) Deriving 5V directly from CPU Board using external Power cable Power jack (2.5mm) is provided to derive external 5V from AC to DC Adapter. A 4 Pin connector is provided on the board, to derive 5V directly from CPU Board. (These connectors can be used during testing or debugging). Reset Switch: Push button Reset option is provided for manual reset of the board. LED: An LED is provided on board to indicate 3.3V is ON Memory The Bluetooth Module...

Bluetooth Interface Module Datasheet Communication The board is designed for serial communication between the Bluetooth module and a CPU Board. Standard UART signals are used for transferring the data between board and PC. Two handshaking signals (CTS and RTS) are used for synchronization. The data from any Bluetooth enabled device are transferred to the main CPU Board through this module. Physical Characteristics The length and width of the Bluetooth Add-On module is 65mm X 45mm. Four mounting holes allow the board to be attached to a surface or case. iWave Systems Technologies Pvt Ltd

Bluetooth Interface Module Datasheet Reference Schematics 3V3 REGULATOR iWave Systems Technologies Pvt Ltd

Bluetooth Interface Module Datasheet CONTROL RESET UART_RX UART_CTS UART_TX UART_RTS BT_RX BT_CTS BT_TX BT_RTS UART_RTS UART_RX UART_CTS UART_TX iWave Systems Technologies Pvt Ltd

Bluetooth Interface Module Datasheet OPTIONAL RESET BT_RTS BT_TX BT_CTS BT_RX Reset iWave Systems Technologies Pvt Ltd

Bluetooth Interface Module Datasheet /Wave Embedding Intelligence E-mail: emdby@iwavesystems.com Address: iWave Systems Technologies. Pvt. Ltd. 7/B, 29th Main, BTM Layout, 2nd Stage Bangalore -560 076, India. Phone: +91 80 26786243/45 iWave Systems Technologies Pvt Ltd Page 9