Catalogs >
IWAKI >
CL-60WL

CL-60WL
2Pages

Catalog excerpts

PDF_W0073-02 Residual Chlorine Concentration Controller CL-60WL Cost saving with no wasted water Low cost and easy to use swimming pool residual chlorine controller CL-60WL is a low cost and easy to use controller for continuously measuring residual chlorine in swimming pools and drinking water. The 3-electrode polarograph sensor is able to measure many kinds of water such as swimming pool water and drinking water etc. The electrode is automatically cleaned by ceramic beads and electrolytic cleaning (manual/automatic/interval) to avoid chemical residue buildup which could otherwise give false readings. • No wasted water because of inline type flow cell • Thanks to 3-electrode polarograph sensor, it is not influenced by impurities in test water or conductivity and gives superior linearity. • Multi-voltage power source from AC90 to 240V. • Electromagnet metering pumps can be directly controlled (proportional dosing) by the pulse control output. • Flow cell is easily removed for maintenance. • Pump control output can be manually interrupted during abnormal conditions to prevent excessive chlorine injection. • Flow proportional control of the dosing pump is possible by proportional DC4-20mA input signals from a flow meter installed in the main water piping. • Override function allows pump operation at maximum speed (360 spm with electromagnet metering pump) by contact input during super chlorination or pump maintenance. • Alarm output can be set optionally (NO x 3)

Open the catalog to page 1

Residual Chlorine Concentration Controller Option Flow switch FC-SM40-100V The switch to detect low limit flow rate. The switch is ON when flow rate becomes lower than set value. Set range : 0.2 - 2.4 L/min Bore : Rc1/2 Output : Contact output Resistance load 110V AC/DC 0.25A 20W at cosø=1 max Alarm : Alarm is activated when flow rate becomes lower than set value Filter housing 10-KFKC-1/2 Transparent casing for filter cartridge. (Note) Ask us for nontransparent type. Filter cartridge SFP-1100 (100µm) To remove dust or foreign matters in test water. Mounting hardware 10-KFKC-FT To mount...

Open the catalog to page 2