SMX
8Pages

Catalog excerpts

Main material gfrpp IWAKI SELF-PRIMING MAGNETIC DRIVE PUMPS Solutions for chemical handling applications

Versatile self-priming magnetic drive pump with enhanced durability under abnormal operation The SMX is a horizontal self-priming magnetic drive pump made from reinforced plastic. Our original self-radiation structure (Patented) enhances resistance to dry running, cavitation, and closed-discharge operation. In addition, the use of standard motors extends the range of application.

Open the catalog to page 2

IWAKI SELF-PRIMING MAGNETIC DRIVE PUMPS Expanded versatility Enhanced durability under abnormal operation The SMX has a modular structure to handle liquids with Our original self-radiation structure (Patented) efficiently high specific gravities. Use of standard motors extends the disperses bearing friction heat to protect the pump under range of liquid application. abnormal operating conditions. In addition, our non-contact structure prevents contact between rear thrust face and bearing, to eliminate heat buildup during dry running. Easy maintenance The pump wet end can be removed from the...

Open the catalog to page 3

Wet-end materials Name of part Notel : SMX-22 □ T, 54 □ T, 54 □ X do not have a Volute spacer Note2 : Exclusive for SMX-22RA, 44RA

Open the catalog to page 4

IWAKI SELF-PRIMING MAGNETIC DRIVE PUMPS 2 On starting, the pump will suck both gas and liquid 1 Prime the pump with liquid. into its inlet. This mixture moves through front case A to the front casing, where it is agitated by the impeller. The mixture is discharged through pump chamber B to rear case C, where gas and liquid separation then occurs. Gas is bled from the discharge port D while some liquid is retained. Liquid in the rear case C is fed back through circulation hole E to the front casing, where it is again mixed with entrained gas by the impeller. This recirculation & bleeding...

Open the catalog to page 5

• The self-priming height limit noted above refers to a liquid equivalent to fresh water at 20°C. The self-priming height limit varies with the liquid temperature and the type of liquid. • Temperature range of handled liquid: 0 to 80°C (The self-priming height limit decreases at high temperatures.) Pump identification ^Series symbol SMX : GFRPP type Pump size 22 : 25 (Suction) X 25 (Discharge) 44 : 40 (Suction) X 40 (Discharge) 50 : 50 (Suction) X 40 (Discharge) Material of O-ring V : FKM E : EPDM 1 Motor specifications E : IEC Motor ^Materials of Bearing / Spindle / Liner ring CA : Carbon...

Open the catalog to page 6

iwaki self-priming magnetic drive pumps The dimensions L may differ with the type of motor installed.

Open the catalog to page 7

iwaki self-priming magnetic drive pumps Optional accessories Iwaki pump protector DRN series Detects unusual pump operating conditions including dry-running and overload The DRN model protects equipment (including pumps) from damage! Minimizes production downtime. Identifies possible causes of alarms so they can be investigated and addressed. Multiple Input Easy operation Bar graph Logging capability Communication Two analog, one digital, one temperature input and one current input Equipped with EASY setup mode to remember the operation status and set the lower/upper limit values, as well...

Open the catalog to page 8