MXM
5Pages

{{requestButtons}}

Catalog excerpts

MXM - 1

IWAKI MAGNETIC DRIVE PUMPS Solutions for chemical handling applications

Open the catalog to page 1
MXM - 2

IWAKI MAGNETIC DRIVE PUMPS Magnetic drive pumps with an excellent balance of features and performance The MXM series of pumps have now been added to the line-up of Iwaki’s magnetic drive process pumps, which have earned high acclaim and the trust of users all around the world. The new MXM series feature an excellent balance of the characteristics required of chemical pumps, including corrosion resistance, durability and safety. They employ a non-contact, self-radiating bearing structure to better withstand difficult operating conditions. The advent of the MXM series has further expanded the...

Open the catalog to page 2
MXM - 3

MXM Construction and materials Material code Part 2 Rear casing 3 Impeller 4 Magnet capsule 11 Lock pin 5 Spindle | 1 Front casing 7 Liner ring Specifications (50Hz) Pump identification Model Notel: Liquid temp. range Standard: -10 to 90 °C High temp. version (with rear casing cover): -10 to 105 °C (10 to 105 °C when AFLAS® O ring is used) Note2: Max operating pressure Standard MXM22: 0.2MPa, MXM44: 0.3MPa, MXM54: 0.45MPa High temp. version (with rear casing cover): 0.7MPa Pump size (Suction x Discharge) 22 : 25mm x 25mm 44 : 40mm x 40mm 54 : 50mm x 40mm Standard H : High temperature...

Open the catalog to page 3
MXM - 4

Performance curves Dimensions in mm Without base HEAD (m) HEAD (m) HEAD (m) Notes for selection MXM54 (Impeller range 4) (1) The performance curves in this catalogue represent the data measured using clear water at 20 °C. (2) Choose the pump model suited to the liquid gravity. Make sure that the motor output is ten percect higher than theoretically required. Shaft power (Sp) x liquid gravity x 1.1 < Motor output (Note) The shaft power (Sp) increases in proportion to the liquid gravity. As the viscosity rises, the shaft power is higher while the head and the discharge are lower. The...

Open the catalog to page 4
MXM - 5

IWAKI MAGNETIC DRIVE PUMPS Optional accessories Iwaki pump protector DRN series Detects unusual pump operating conditions including dry-running and overload The DRN model protects equipment (including pumps) from damage! Minimizes production downtime. Identifies possible causes of alarms so they can be investigated and addressed. Multiple Input Easy operation Bar graph Logging capability Communication Two analog, one digital, one temperature input and one current input Equipped with EASY setup mode to remember the operation status and set the lower/upper limit values, as well as AUTO setup...

Open the catalog to page 5

All IWAKI Europe GmbH catalogs and technical brochures

  1. TC-X

    28 Pages

  2. IX-B

    8 Pages

  3. MEK

    5 Pages

  4. MMP

    2 Pages

  5. MP series

    2 Pages

  6. MTFO

    2 Pages

  7. IX-C/D

    12 Pages

  8. NRD/RD

    4 Pages

  9. SMX-F

    8 Pages

  10. EJ-R

    2 Pages

  11. EWN-W

    2 Pages

  12. V

    8 Pages

  13. Serie MDW

    8 Pages

  14. MDE

    8 Pages

  15. MDM

    5 Pages

  16. SMX

    8 Pages

  17. RD-40

    2 Pages

  18. EWN-Y

    8 Pages

  19. EWN-A

    2 Pages

  20. MX

    8 Pages

  21. MD-F, MD-V

    10 Pages

  22. HRP

    2 Pages

  23. MDM NP

    8 Pages

  24. FW/-H

    12 Pages

  25. Serie YMD

    8 Pages

  26. Serie CFD

    12 Pages

  27. Serie FA

    12 Pages

  28. Air pumps

    8 Pages

  29. Serie MDT

    2 Pages

Archived catalogs

  1. RD

    4 Pages

  2. Hicera pumps

    4 Pages