Catalog excerpts
IWAKI ELECTROMAGNETIC METERING PUMPS Solutions for chemical handling applications
Open the catalog to page 1Electromagnetic metering pumps with precise flow monitoring, Upgraded software with new features and improved functions New features • Feedback control is now available with digital pulse signal operation in addition to analog control. (Flowrate feedback operation using a pulse input enables easy replacement of existing equipment.) • Alarm output can be programmed for either normally open or normally closed operation. The EWN-Y electromagnetic pump combined with EFS flow sensor (option) provides accurate real time control & display of dosing rate. The required flow rate is simply input to...
Open the catalog to page 2IWAKI ELECTROMAGNETIC METERING PUMPS , feedback & control Displaying flow rate Pump flow rate may be displayed. In case the EFS flow sensor (option) is installed, the EWN-Y pump can display accurate real time flow rate without any calibration. Feedback control (with EFS) Flow rate monitoring of individual strokes by the EFS sensor enable fast response feed back control. The feedback control maintains the set capacity by manually or externally with analog input signal. Discharge detection Direct connection to the IWAKI FCP or FCM flow counter (excluding certain low- pressure models) allows...
Open the catalog to page 3Wet-end materials Pump identification EWN=f— Series symbol EWN series Drive unit symbol Average power consumption B: 20W C: 24W Wet-end material symbol For details, see the table of materials. ^Connection Blank: 04 x 06 (B09,B11,B16,B21,C16,C21) 09 x 012 (B31,C31,C36) For other option, please contact us. Controller function code Y: Y type Power code E: With European cord A: With Australian cord Special version code C: High compression type H: High pressure type V: Viscosity type
Open the catalog to page 4IWAKI ELECTROMAGNETIC METERING PUMPS Specifications of pump Model • Each discharge capacity shown above is at discharge pressure (stroke length 100%, stroke rate 100%) and increases as a discharge pressure reduces. • The performance is based on pumping clean water at ambient temperature at rated voltage. • Liquid temperature -VC/VH types: -10 to 40°C •PC/PH/FC/SH/TC types: -10 to 60°C • Max pressure is not guaranteed under any discharge condition. Max pressure of PVC type is 1.2MPa. Please contact us for details. Note 1: The maximum frequency of the input pulse is 500 Hz (Duty 50:50). Note...
Open the catalog to page 5• Constructions and materials • Constructions and materials Applicable pump Power voltage
Open the catalog to page 6IWAKI ELECTROMAGNETIC METERING PUMPS Accessories • Check valve CAN / CBN / CS This has the function of a non-return valve and prevents siphon and overfeed. CAN: Available in PVC and GFRPP. CBN: In-line type to be connected in the middle of a hose; made of PVC. CS: Made of stainless steel for SH type. • Specifications • Foot valve FS / FSP / FSTC This foot valve with a strainer is made of PVC or GFRPP. • Specifications • Siphon preventing valve BVC Made of PVC or GFRPP consisting of non-metalic parts. • Specifications • Chemical tank EXDT This is a polyetylene round tank. • Priming set PS...
Open the catalog to page 7IWAKI ELECTROMAGNETIC METERING PUMPS https://www.iwaki.de IWAKI Europe GmbH, Siemensring 115, 47877 Willich, Germany TEL: +49 2154 9254 0 FAX: +49 2154 9254 48 E-Mail: sales@iwaki.de Caution for safety use: Actual pUmpS may differ from the photos. Before use of pump, read instruction manual carefully to use the product correctly. Specifications and dimensions are subject to change without prior notice. For further details please contact us. The posting and copying from this catalogue without permission is not accepted firmly. Our products and/or parts of products fall in the category of...
Open the catalog to page 8All IWAKI Europe GmbH catalogs and technical brochures
-
TC-X
28 Pages
-
IX-B
8 Pages
-
MEK
5 Pages
-
MMP
2 Pages
-
MP series
2 Pages
-
MTFO
2 Pages
-
LK Metering pumps
8 Pages
-
IX-C/D
12 Pages
-
MX-F magnet drive pumps
8 Pages
-
NRD/RD
4 Pages
-
SMX-F
8 Pages
-
EJ-R
2 Pages
-
EWN-W
2 Pages
-
V
8 Pages
-
Serie MDW
8 Pages
-
MDE
8 Pages
-
MDM
5 Pages
-
MXM
5 Pages
-
SMX
8 Pages
-
RD-40
2 Pages
-
EWN-A
2 Pages
-
Magnetic drive pumps MD series
12 Pages
-
MX
8 Pages
-
MD-F, MD-V
10 Pages
-
EWN-Y-A & EFS
2 Pages
-
HRP
2 Pages
-
MDM NP
8 Pages
-
FW/-H
12 Pages
-
Serie YMD
8 Pages
-
Serie CFD
12 Pages
-
Serie FA
12 Pages
-
Air pumps
8 Pages
-
Serie MDT
2 Pages
Archived catalogs
-
RD
4 Pages
-
Hicera pumps
4 Pages
-
Chemical gear pumps
8 Pages
-
Bellows pumps
2 Pages