IWAKI ELECTROMAGNETIC METERING PUMPS PVDF type Global Pump, Economical PriceThe EJ Series provide precise chemical injection with an economical cost. Universal voltage capability enables operation from 100 - 240VAC in virtually all countries. The EJ Series are compact, simple to operate and have outputs to 4.8L/H and a maximum pressure of 1.2MPa. High Speed Performance The EJ Series operate at 360 strokes-per-minute, providing high resolution chemical feed and high turndown capability. Most competitive products operate at slower speeds, resulting in slug feeding, accelerated diaphragm wear and poor feed control. Universal Voltage The Universal Voltage Function enables the EJ Series to operate at any AC voltage. The EJ Series also conform to global standards. IP65 equivalent Protection A robust housing protects the pump from normal wear. Mounting the Digital Display and Key Pad control within the drive housing creates a highly water resistant design. A clear cover further protects the pump from liquids. Solutions for chemical handling applications

IWAKI ELECTROMAGNETIC METERING PUMPS Wet-end materials Material sumbol PVC : Transparent polyvinyl chloride HC276 : Hastelloy C276 EPDM : Ethylene-propylene rubber PVDF : Polyvinylidene difluoride FKM : Fluorine-contained rubber PTFE : Polytetrafluoroethylene Pump identification 5 Gasket □□ Drive unit symbol Average power consumption B: 15W ■% Special configuration code 6 Diaphragm Controller function code 4 Special version code R: With external control 4 Valve seat Wet -end material symbol For details, see the table of materials. VC, VH, TC i Power code E: European cord Connection For details,...