Product Catalog About IVEK 4 Technical Overview System Components 6 Control Modes 10 Channel Configurations 10 Pump Modules Micro Rotary and SR Pump Modules 11 Sanitary Split Case Pump Module 14 Heavy Duty 5ml Pump Module 16 MegaSpense® Pump Module 17 Micro Linear Pump Module 18 Micro Linear SL Pump Module 20 Macro Linear Pump Module 22 SF and LF Multiplex Pump Modules 24 Motor Bases and Actuators MicroSpense® AP Motor Base 26 Heavy Duty Motor Base 29 MegaSpense® 31 Micro and Macro Linear Actuators 33 Multiplex Actuator 36 Single Channel Dispensing Systems ElectroSpense® 38 DigiSpense® 3009 40...

Product Catalog Specialty Systems Methaspense® Controlled Substance Dispensing Systems. 52 DigiSpense® 1000 Controlled Substance Dispensing System 53 Controlled Substance Dispensing Station 54 Linear Reagent Microstriper (LFA) 55 Digisonic III – Ultrasonic Atomization System 57 Sonicair – Atomizing Systems 59 OEM Products and Services OEM Services 61 Ceramic Liquid Valves and Valve Components 62 Autopipettor – Precision Aspirating and Dispensing Module 63 Displacement Pump – Size 11 66 Displacement Pump – Size 17 69 Metering Pumps 72 Accessories Fluid Circulation Module 74 Heater System 75 Liquid...

Product Catalog ABOUT IVEK Since 1979 IVEK Corporation has been designing and manufacturing precision small volume Fluid Metering and Dispensing Systems since 1979. Exceptional fluid control over small volumes is the specialty of our Liquid Dispensers and Metering Pumps. IVEK products are custom specified and free application testing helps us accurately assess requirements and define customer expectations. Quality Products Our products are relied upon for critical applications and our policy states customer satisfaction as the number one priority. Every product undergoes extensive testing and...

Product Catalog ABOUT IVEK Precision Manufacturing IVEK controls critical processes through inhouse manufacturing. Maintaining control over these processes has increased our quality, reliability and performance. This also allows for flexibility of delivery for our customers when needed. Customer Support Our company policy states customer satisfaction as the number one priority. Our experience has proven that applications analysis and technical support are essential for each project. Technical Support staff is available in-house or worldwide travel to provide installation assistance and problem...

Product Catalog TECHNICAL OVERVIEW SYSTEM COMPONENTS An IVEK fluid handling system consists of three main components: pump module(s), motor base(s) or actuator(s) and a controller. pump module (1) Pump Module: The IVEK pump module incorporates a ceramic piston/valve/cylinder set with housing. The housing for IVEK’s piston/valve/cylinder sets are typically comprised of 316 Stainless Steel or Tefzel. Custom materials can be used and are available upon request. The piston/valve/cylinder set is sealed by the fit of the piston into the cylinder. IVEK pump modules are positive displacement mechanisms...

Product Catalog TECHNICAL OVERVIEW SYSTEM COMPONENTS The three types of pump modules are as follows: a) Rotary: Rotary systems use an offset drive to create simultaneous rotary and linear motion on the piston. Each single 360° rotation of the motor results in an intake and discharge cycle. The stroke length of the piston (displacement) is mechanically adjusted. The rate the piston travels is electronically adjusted through the motor speed. Rotary systems can be configured into single or multiple channel metering or dispensing systems. The flow profile of a single stroke (volume over time) is...

Product Catalog TECHNICAL OVERVIEW FLUID INTAKE & DISCHARGE BY ACTUATOR TYPE ROTARY* fluid inlet fluid inlet fluid inlet fluid outlet the piston is shown at bottom dead center of its stroke. both inlet and outlet ports are closed and piston flat is rotating toward the inlet port. fluid inlet fluid outlet fluid outlet the piston is shown at the beginning of the intake stroke. the flat on the piston opens the inlet port to the pump chamber and the outlet port is closed. the module is shown at the beginning of the intake stroke. the flat on the valve opens the inlet port to the pump chamber and...

Product Catalog TECHNICAL OVERVIEW SYSTEM COMPONENTS (2)Motor/Base or Actuator Module: The Motor/Base or Actuator Module drives the Pump Module. There are three main varieties that correspond to the Pump Module types. The Motor/Base or Actuator Module drives the piston in a linear direction for the intake and discharge functions. Rotary motion is used for the valving function. Motor/base or actuators available include: Heavy duty Motor Base (rotary system) • sed for larger dispenses U • Different motor sizes available for various fluid viscosities AP Motor Base (rotary system) • Auto Prime allows...

Product Catalog TECHNICAL OVERVIEW SYSTEM COMPONENTS (3)Controller Module: IVEK Corporation designs and manufactures its own dedicated electronics for the product line. The electronics are specifically designed to maximize fluidic performance. Forward and reverse fluid movement, linear adjustable rate control, volume select, prime and dispense modes and drawback, for shearing viscous materials, are a partial list of the control options available. The Controller Module can also include an operator interface panel to set parameters and signal alarms. Multiple channels, PLC interfacing, RS232 communication,...

Product Catalog PUMP MODULES MICRO ROTARY AND MICRO SR PUMP MODULES The Micro Rotary and Micro SR (Sanitary Rotary) Pump Modules are comprised of a ceramic piston fabrication and mated ceramic cylinder pressed into a case having intake and discharge ports. The Pump Modules are designed for easy detachment from the Motor/Base Module and disassembly for ease of cleaning, decontamination and sterilization. The intake and discharge ports accept either 1/4-28 or 5/16-24 universal fittings. Three sizes of Micro Rotary and Micro SR Pump Module are available to meet specific dosing requirements. These...