ATOMIZING SYSTEMS
2Pages

ATOMIZING SYSTEMS FEATURES AND BENEFITS • volumes down to 0.3µl • high repeatability • 5-50 micron droplet size • low-pressure spray field • atomization achieved as low as 3psi • autoclavable • corrosion resistant • 316 stainless steel • nozzle diameters down to 5mm OD • nozzle lengths to 90mm • heated applications • no moving parts • alternative gases may be used • capable of high speed manufacturing TYPICAL APPLICATIONS • silicone atomization • syringe barrel coatings • needle coatings • stent coatings • blood collection tubes • sterilization chambers • catheter coatings • pharmaceutical bottles • atomizing emulsions • atomizing reagents • spray dryer applications • atomizing electrolytes • plasticizers for solvent bonding • aromatic additives • hydration additives • and many more sonicair nozzle spray 90mm x 5mm soniair nozzle coating glass syringe sonicair: body block, fitting connections & heater slot 33.2mm x 9.27mm x 31.5mm sonicair nozzle coating plastic syringe ISO 9001 CERTIFIED ISO 13485 CERTIFIED IVEK CORPORATION • 10 Fairbanks Road • North Springfield • Vermont • 05150 • USA Tel: (01) 802-886-2238 • F

ATOMIZING SYSTEMS IVEK’s Sonicair Atomizing System is utilized for applications requiring a consistent and precise coating method. The Sonicair nozzle is manufactured from 316 stainless steel and there are no moving parts or valves that can compromise the effectiveness of the spray. Unlike many air nozzles that depend on time and pressure to atomize fluids, a ceramic positive displacement pump feeds the IVEK Sonicair nozzle. This delivers a precise volume of fluid to the nozzle, injecting it into an air stream creates an atomized field that exits the nozzle through a precision orifice. The...