Front-end loader FUB 7.0 – 1600 mm with steel lift-up lid Technical specification Body: hot dip galvanized front-, rear and side walls stably embossed on top all-round strengthened frame stable, conical container lifting pockets skids adaptation drainage plug at the bottom with bayonet joint container frame consist of square profile steel 4 ASK-transport plugs tilting shutter to increase the emptying cross section of container Lifting pockets: - pocket length 700mm with cut-out for short forks - pockets locked with 20 Bolts M10 8.8 at the side walls Lids: - at the front steel lift-up lid in high quality suitable for galvanizing as per DIN bore on double steel frame 40 x 50mm, idle pivoted, bore on the body, opening stop by maintenance-free gravity pivot plate - at the back steel lift-up lid in high quality steel - body, lid, lifting pockets and double steel frame hot dip galvanized - lid closing mechanism zinc-plated YOUR WISH IS OUR CREATIVITY Our containers can be maintained with skid loading plugs and coupling device. Can be combined with several other options. Ask our Sales Team and get the tailored solutions. IVB Umwelttechnik GmbH Permissible Total weight: 1500 kg Appropriate weight: 460 kg Bleiche 4 D-09456 Annaberg-Buchholz phone: +49 (0) 3733 5599 -0 • Fax: -111 E-Mail: [email protected] Internet: www.IVB-Umwelttechnik.com

FUB 7.0 for fork mediocrity 1720 mm Container width at the lifting pockets with dimensions of 1600 mm IVB Umwelttechnik GmbH Bleiche 4 D-09456 Annaberg-Buchholz phone: +49 (0) 3733 5599 -0 • Fax: -111 E-Mail: [email protected] Internet: www.IVB-Umwelttechnik.com technical modifications are permitted without prior notice © IVB Umwelttechnik GmbH Annaberg Stand 10/09