Depot container for waste paper DCP 2.0 / 2.5 / 3.0 / 3.6 made of galvanized steel sheet with paper slot Technical specification - single chambered tension hook system with two-sided ground flaps opening - roof made of hot dip galvanized steel sheet - edge protection at the sloting area - front-, back- and side walls made of hot dip galvanized steel sheet thickness 1,5 mm - Container walls are riveted at both sides - floor frame made of hot dip galvanized steel sheet - ground flaps are stored with hinge part at the ground frame - Interior screwed carrier construction with execution for tension pole - changeable fixed hook, screwed with carrier construction IVB Umwelttechnik GmbH Bleiche 4 D-09456 Annaberg-Buchholz phone: +49 (0) 3733 5599 -0 • Fax: -111 E-Mail: [email protected] Internet: www.IVB-Umwelttechnik.com

Depot container for waste paper DCP 2.0 / 2.5 / 3.0 / 3.6 Depot container External dimensions: Utility volume: length (front- and back side): 1255 mm depth (side wall left & right): 1215 mm height (ground flap till tension hook eyelet): 1670 mm 1,95 m³ Depot container External dimensions: Utility volume: Utility volume: Utility volume: length (front- and back side): 1870 mm depth (side wall left & right): 1215 mm height (ground flap till tension hook eyelet): 1670 mm 2,90 m³ Depot container External dimensions: length (front- and back side): 1560 mm depth (side wall left & right): 1215 mm height...