Depot container for glass DCG 2.0 / 2.5 / 3.0 Standard with slot Technical specification - single chambered tension hook system with two-sided ground flaps opening - roof, ground flaps, front-, rear and side walls made of industrial hot dip galvanized steel sheet - interior screwed carrier construction with execution for tension pole - changeable fixed hook - riveted plastic slots on both sides of the trapezoidal roof - plastic slots and inside roof are padded with foam material for noise protection - walls are fixed by a hot dip galvanized steel frame - 2 ground flaps are stored on the container frame - insulation of ground flaps by foam flaps and additional 8mm rubber mat IVB Umwelttechnik GmbH Bleiche 4 D-09456 Annaberg-Buchholz phone: +49 (0) 3733 5599 -0 • Fax: -111 E-Mail: [email protected] Internet: www.IVB-Umwelttechnik.com

Depot container for glass DCG 2.0 / 2.5 / 3.0 Standard Depot container External dimensions: Utility volume: length (front- and back side): 1255 mm depth (side wall left & right): 1215 mm height (ground flap till tension hook eyelet): 1670 mm 1,95 m³ Depot container External dimensions: Utility volume: Utility volume: length (front- and back side): 1560 mm depth (side wall left & right): 1215 mm height (ground flap till tension hook eyelet): 1670 mm 2,42 m³ Depot container External dimensions: length (front- and back side): 1870 mm depth (side wall left & right): 1215 mm height (ground flap till...