Round Transvectors
2Pages

{{requestButtons}}

Catalog excerpts

Round Transvectors - 1

Blowoff, Cooling or Conveying Round Transvectors® use a small amount of filtered compressed air to deliver a large airflow for a wide range of conveying, ventilation, drying and cooling applications. The high-flow, bladeless blowers don't require machine guards and are especially useful for removing metal chips and scrap, ventilating fumes or smoke, and conveying small parts, pellets, powders and dust. As a vacuum or blowoff device, these air amplifiers are more compact and less expensive than variable-speed blowers and fans, provide instant on/off performance, and operate at low noise levels to meet OSHA requirements. Round Transvectors® are easily mounted and, with no moving parts to wear out or break, are virtually maintenance-free. Used in ducted and unducted applications, Round Transvectors® are available in several sizes, in both aluminum and stainless steel, and can deliver flow rates from 32 to 2300 SCFM. Tranvectors' wide range of applications include • Convey any material that can be moved in an airflow including grain, plastic pellets, sawdust, powder, capsules, metal chips, paper and cloth trim, lint, dust, small parts, stamping scrap and lead shot. • Ventilate and exhaust welding, soldering and machine smoke, auto exhaust, plating tank fumes • Cool, clean or dry molded parts, castings, • Weigh sort pharmaceuticals and other light principle to achieve amplified airflows. When compressed air enters the Transvector, it fills a chamber that has only one exit orifice, it accelerates and collides with surrounding air entraining a great volume of free, ambient air. The result is a large volume of output air in return for a small Significantly smaller and less expensive than variable-speed blowers or fans Instant on/off - no moving parts Airflow and output easily adjusted No guards or safety hazards Quiet — meets OSHA noise requirements Easily mounted, ducted and moved Outperforms Venturis and ejectors No electricity, explosion hazard or RF interference

Open the catalog to page 1
Round Transvectors - 2

Performance Specifications (SLPM) (SCFM) (SLPM) I AMPLIFICATION I DUCTED OUTPUT All flows are at the standard factory setting. Flows are adjustable on the stainless models via rotation of the outlet "barrel". Flows are adjustable on the other models via shim substitution. Reducer adapters available for Inline configuration. 'Model 901B - Brass Construction Aluminum Transvector Dimensions Column headings refer to dimensions shown In Illustrations at bottom of page. Stainless Steel Transvector Dimensions Column headings refer to dimensions shown in illustrations at bottom of page. MODEL NO....

Open the catalog to page 2

All ITW Air Management catalogs and technical brochures

  1. Vortex tubes

    2 Pages

  2. Vortex Tube

    4 Pages

  3. Cold Air Gun

    1 Pages

  4. Hot_Air_Guns

    1 Pages

  5. Dua lForce

    2 Pages

  6. Vortex AC

    2 Pages

  7. VortexAC7770

    2 Pages

Archived catalogs